# Ignition in W7: Run as an administrator

**URL:** <https://forum.inductiveautomation.com/t/ignition-in-w7-run-as-an-administrator/2687>\
**Category:** Archived Topics\
**Created:** [February 24, 2011, 1:39am UTC](https://forum.inductiveautomation.com/t/ignition-in-w7-run-as-an-administrator/2687 "2011-02-24T01:39:22Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![Pulsar2003](https://avatars.discourse-cdn.com/v4/letter/p/ecb155/32.png) [@Pulsar2003](https://forum.inductiveautomation.com/u/Pulsar2003)\
**Post date:** [February 24, 2011, 1:39am UTC](https://forum.inductiveautomation.com/t/ignition-in-w7-run-as-an-administrator/2687/1 "2011-02-24T01:39:22Z")

</div>

Hello,

I’ve got W7 for almost a year now. There are allot of features I have not used yet.

What annoys me a bit is that in order to use Ignition I always need to right click on it and choose to run as an administrator in order to get the software running. Shortly after in the task bar there is a shield that shows up and I have to accept again.

Same thing goes for the Ignition Designer.

Is there a way to avoid having to go through these steps all the time?

Thank you.

---

<div class="post-metadata">

**Author:** ![Colby.Clegg](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/colby.clegg/32/3282_2.png) [@Colby.Clegg](https://forum.inductiveautomation.com/u/Colby.Clegg)\
**Post date:** [February 24, 2011, 2:17am UTC](https://forum.inductiveautomation.com/t/ignition-in-w7-run-as-an-administrator/2687/2 "2011-02-24T02:17:52Z")

</div>

Well, there are probably a few things you could do:

1. Since you’re right clicking on something, I assume it’s a shortcut on the desktop. If so, you could right-click, go to Properties\>Compatibility, and select “Run this program as an administrator”. That way you don’t have to right-click each time.

2. You could [Turn off the UAC](http://www.mydigitallife.info/2008/12/30/how-to-disable-and-turn-off-uac-in-windows-7/). Guess it’s not recommended, but that’s what I’ve done… which is why I also don’t have a good sense of what normal users go through. After you turn that off you don’t get asked about anything, so it’s much more like XP, except better.

Perhaps other users have other suggestions.

Regards,

---

<div class="post-metadata">

**Author:** ![Pulsar2003](https://avatars.discourse-cdn.com/v4/letter/p/ecb155/32.png) [@Pulsar2003](https://forum.inductiveautomation.com/u/Pulsar2003)\
**Post date:** [February 24, 2011, 2:48am UTC](https://forum.inductiveautomation.com/t/ignition-in-w7-run-as-an-administrator/2687/3 "2011-02-24T02:48:48Z")

</div>

Hello Colby.

Actually it’s in the START menu. As I use Ignition allot it ends up being the top of the list of the software list.

If I only left click on it the small animated circle popups up and then disappears. That’s it. It ends. Ignition doesn’t start up.

I have to right click on the Icon in the Start menu and choose Run As Administrator. Then the shield shows up, etc.

Thanks.

---

<div class="post-metadata">

**Author:** ![JordanCClark](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jordancclark/32/83362_2.png) [@JordanCClark](https://forum.inductiveautomation.com/u/JordanCClark)\
**Post date:** [February 24, 2011, 11:34am UTC](https://forum.inductiveautomation.com/t/ignition-in-w7-run-as-an-administrator/2687/4 "2011-02-24T11:34:19Z")

</div>

You can actually launch a program through the task scheduler and bypass UAC:

[(article here)](http://www.vikitech.com/253/create-shortcuts-for-trusted-programs-to-bypass-windows-7-uac-check)

EDIT: Found a link in that same article for a feeware app called [UAC Trust Shortcut](http://www.vikitech.com/1454/allow-any-program-to-bypass-uac-prompt-easily-with-uac-trust-shortcut)

---

<div class="post-metadata">

**Author:** ![Colby.Clegg](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/colby.clegg/32/3282_2.png) [@Colby.Clegg](https://forum.inductiveautomation.com/u/Colby.Clegg)\
**Post date:** [February 24, 2011, 5:09pm UTC](https://forum.inductiveautomation.com/t/ignition-in-w7-run-as-an-administrator/2687/5 "2011-02-24T17:09:08Z")

</div>

Hi,

It doesn’t matter if it’s in the start menu or on the desktop, you can right-click, go to properties and set it to always run as administrator, I believe.

Regards,

---

<div class="post-metadata">

**Author:** ![JordanCClark](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jordancclark/32/83362_2.png) [@JordanCClark](https://forum.inductiveautomation.com/u/JordanCClark)\
**Post date:** [February 25, 2011, 3:40pm UTC](https://forum.inductiveautomation.com/t/ignition-in-w7-run-as-an-administrator/2687/6 "2011-02-25T15:40:44Z")

</div>

[quote=“Colby.Clegg”]Hi,

It doesn’t matter if it’s in the start menu or on the desktop, you can right-click, go to properties and set it to always run as administrator, I believe.

Regards,[/quote]

That is so, but the UAC nag will still pop up. Hence my previous post.

---

<div class="post-metadata">

**Author:** ![Pulsar2003](https://avatars.discourse-cdn.com/v4/letter/p/ecb155/32.png) [@Pulsar2003](https://forum.inductiveautomation.com/u/Pulsar2003)\
**Post date:** [February 27, 2011, 2:40am UTC](https://forum.inductiveautomation.com/t/ignition-in-w7-run-as-an-administrator/2687/7 "2011-02-27T02:40:54Z")

</div>

What I did is I right clicked again and went to the properties.

In the popup window there are tabs on the top. I select the Compatibility one and check the box for Run this program as an Administrator.

I still have the dark screen that demands authorization to proceed.

Thanks.

---

<div class="post-metadata">

**Author:** ![JordanCClark](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jordancclark/32/83362_2.png) [@JordanCClark](https://forum.inductiveautomation.com/u/JordanCClark)\
**Post date:** [February 28, 2011, 1:16pm UTC](https://forum.inductiveautomation.com/t/ignition-in-w7-run-as-an-administrator/2687/8 "2011-02-28T13:16:43Z")

</div>

Sometimes, I just write amazing stuff… 😉

[quote=“JordanCClark”]You can actually launch a program through the task scheduler and bypass UAC:

[(article here)](http://www.vikitech.com/253/create-shortcuts-for-trusted-programs-to-bypass-windows-7-uac-check)

EDIT: Found a link in that same article for a feeware app called [UAC Trust Shortcut](http://www.vikitech.com/1454/allow-any-program-to-bypass-uac-prompt-easily-with-uac-trust-shortcut)[/quote]
