# Ignition Maker Edition via the Kepware server via OPC UA **URL:** \ **Category:** General Discussion\ **Created:** [September 29, 2023, 7:01pm UTC](https://forum.inductiveautomation.com/t/ignition-maker-edition-via-the-kepware-server-via-opc-ua/79867 "2023-09-29T19:01:54Z")\ **Posts on this page:** 14\ **Page:** 1
**Author:** ![Mohammed\_Abbas](https://avatars.discourse-cdn.com/v4/letter/m/bc79bd/32.png) [@Mohammed\_Abbas](https://forum.inductiveautomation.com/u/Mohammed_Abbas)\ **Post date:** [September 29, 2023, 7:01pm UTC](https://forum.inductiveautomation.com/t/ignition-maker-edition-via-the-kepware-server-via-opc-ua/79867/1 "2023-09-29T19:01:54Z")
hi , I hope you're well. I have been sending data between the software (running with a 1ms sample period) and the Ignition Maker Edition via the Kepware. server via OPC UA, but the data is arriving so slowly that I am losing most of it, and when I display it in a curve in the Ignition Maker Edition that does not match the curve in the software, How can I make the Ignition Maker Edition adapt to the speed of data transfer between Kepware. and the software so that the data is not lost and is displayed correctly in the Ignition Maker Edition curve? ---
**Author:** ![dkhayes117](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/dkhayes117/32/68344_2.png) [@dkhayes117](https://forum.inductiveautomation.com/u/dkhayes117)\ **Post date:** [September 29, 2023, 7:08pm UTC](https://forum.inductiveautomation.com/t/ignition-maker-edition-via-the-kepware-server-via-opc-ua/79867/2 "2023-09-29T19:08:17Z")
1ms seems too fast to me. Change it to 100ms and see if that helps. ---
**Author:** ![Transistor](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/transistor/32/3380_2.png) [@Transistor](https://forum.inductiveautomation.com/u/Transistor)\ **Post date:** [September 29, 2023, 7:32pm UTC](https://forum.inductiveautomation.com/t/ignition-maker-edition-via-the-kepware-server-via-opc-ua/79867/3 "2023-09-29T19:32:27Z")
> [@Mohammed\_Abbas](#): > > via the Kpwear server "Kpwear"? Do you mean "Kepware"? ---
**Author:** ![JordanCClark](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jordancclark/32/83362_2.png) [@JordanCClark](https://forum.inductiveautomation.com/u/JordanCClark)\ **Post date:** [September 29, 2023, 7:39pm UTC](https://forum.inductiveautomation.com/t/ignition-maker-edition-via-the-kepware-server-via-opc-ua/79867/4 "2023-09-29T19:39:05Z")
> [@Mohammed\_Abbas](#): > > and the software And what software are we talking about? How is this set up? Is everything on one machine, or are they networked together? ---
**Author:** ![Mohammed\_Abbas](https://avatars.discourse-cdn.com/v4/letter/m/bc79bd/32.png) [@Mohammed\_Abbas](https://forum.inductiveautomation.com/u/Mohammed_Abbas)\ **Post date:** [September 29, 2023, 7:42pm UTC](https://forum.inductiveautomation.com/t/ignition-maker-edition-via-the-kepware-server-via-opc-ua/79867/5 "2023-09-29T19:42:32Z")
Yes, on one device and the software is Matlab simulink ---
**Author:** ![Mohammed\_Abbas](https://avatars.discourse-cdn.com/v4/letter/m/bc79bd/32.png) [@Mohammed\_Abbas](https://forum.inductiveautomation.com/u/Mohammed_Abbas)\ **Post date:** [September 29, 2023, 7:45pm UTC](https://forum.inductiveautomation.com/t/ignition-maker-edition-via-the-kepware-server-via-opc-ua/79867/6 "2023-09-29T19:45:58Z")
yes kepware (KEPServerEXV 6) ---
**Author:** ![Transistor](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/transistor/32/3380_2.png) [@Transistor](https://forum.inductiveautomation.com/u/Transistor)\ **Post date:** [September 29, 2023, 7:49pm UTC](https://forum.inductiveautomation.com/t/ignition-maker-edition-via-the-kepware-server-via-opc-ua/79867/7 "2023-09-29T19:49:13Z")
> [@Mohammed\_Abbas](#): > > yes kepware Hit the pencil icon below your question. You need to fix both the title and the post. (Capital 'K' for Kepware.) ---
**Author:** ![Mohammed\_Abbas](https://avatars.discourse-cdn.com/v4/letter/m/bc79bd/32.png) [@Mohammed\_Abbas](https://forum.inductiveautomation.com/u/Mohammed_Abbas)\ **Post date:** [September 29, 2023, 7:50pm UTC](https://forum.inductiveautomation.com/t/ignition-maker-edition-via-the-kepware-server-via-opc-ua/79867/8 "2023-09-29T19:50:39Z")
> [@Transistor](#): > > Kepware I can't change it because the system I've created imposes this value on me for precision ---
**Author:** ![Mohammed\_Abbas](https://avatars.discourse-cdn.com/v4/letter/m/bc79bd/32.png) [@Mohammed\_Abbas](https://forum.inductiveautomation.com/u/Mohammed_Abbas)\ **Post date:** [September 29, 2023, 7:53pm UTC](https://forum.inductiveautomation.com/t/ignition-maker-edition-via-the-kepware-server-via-opc-ua/79867/9 "2023-09-29T19:53:05Z")
> [@Transistor](#): > > Hit the pencil icon below your question. You need to fix both the title and the post. (Capital 'K' for Kepware.) Thanks ---
**Author:** ![Transistor](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/transistor/32/3380_2.png) [@Transistor](https://forum.inductiveautomation.com/u/Transistor)\ **Post date:** [September 29, 2023, 7:57pm UTC](https://forum.inductiveautomation.com/t/ignition-maker-edition-via-the-kepware-server-via-opc-ua/79867/10 "2023-09-29T19:57:59Z")
> [@Mohammed\_Abbas](#): > > ... the system I've created imposes this value on me for precision I don't understand this. Are you saying that you can't edit the post for this reason? ---
**Author:** ![Mohammed\_Abbas](https://avatars.discourse-cdn.com/v4/letter/m/bc79bd/32.png) [@Mohammed\_Abbas](https://forum.inductiveautomation.com/u/Mohammed_Abbas)\ **Post date:** [September 29, 2023, 8:24pm UTC](https://forum.inductiveautomation.com/t/ignition-maker-edition-via-the-kepware-server-via-opc-ua/79867/11 "2023-09-29T20:24:19Z")
Sorry, I made a mistake in my reply. Thank you very much. I have corrected the error ---
**Author:** ![Mohammed\_Abbas](https://avatars.discourse-cdn.com/v4/letter/m/bc79bd/32.png) [@Mohammed\_Abbas](https://forum.inductiveautomation.com/u/Mohammed_Abbas)\ **Post date:** [September 29, 2023, 8:25pm UTC](https://forum.inductiveautomation.com/t/ignition-maker-edition-via-the-kepware-server-via-opc-ua/79867/12 "2023-09-29T20:25:02Z")
> [@Mohammed\_Abbas](#): > > I can't change it because the system I've created imposes this value on me for precision I can't change it because the system I've created imposes this value on me for precision ---
**Author:** ![Mohammed\_Abbas](https://avatars.discourse-cdn.com/v4/letter/m/bc79bd/32.png) [@Mohammed\_Abbas](https://forum.inductiveautomation.com/u/Mohammed_Abbas)\ **Post date:** [September 29, 2023, 8:26pm UTC](https://forum.inductiveautomation.com/t/ignition-maker-edition-via-the-kepware-server-via-opc-ua/79867/13 "2023-09-29T20:26:27Z")
> [@Mohammed\_Abbas](#): > > Yes, on one device and the software is Matlab simulink Yes, on one device and the software is Matlab simulink ---
**Author:** ![Transistor](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/transistor/32/3380_2.png) [@Transistor](https://forum.inductiveautomation.com/u/Transistor)\ **Post date:** [September 30, 2023, 10:33am UTC](https://forum.inductiveautomation.com/t/ignition-maker-edition-via-the-kepware-server-via-opc-ua/79867/14 "2023-09-30T10:33:20Z")
This topic has been cross-posted. > [@How can I make the Ignition Maker Edition adapt to the speed of data transfer between Kepware and the software (matlab) , so that the data is not lost and is displayed correctly in the Ignition Maker Edition curve?](https://forum.inductiveautomation.com/t/how-can-i-make-the-ignition-maker-edition-adapt-to-the-speed-of-data-transfer-between-kepware-and-the-software-matlab-so-that-the-data-is-not-lost-and-is-displayed-correctly-in-the-ignition-maker-edition-curve/79878): > > hi , I hope you're well. I have been sending data between the software (running with a 1ms sample period) and the Ignition Maker Edition via the Kepware. server via OPC UA, but the data is arriving so slowly that I am losing most of it, and when I display it in a curve in the Ignition Maker Edition that does not match the curve in the software, How can I make the Ignition Maker Edition adapt to the speed of data transfer between Kepware. and the software so that the data is not lost and is displ…