# Ignition Maker Edition via the Kepware server via OPC UA **URL:** \ **Category:** General Discussion\ **Created:** [September 29, 2023, 7:01pm UTC](https://forum.inductiveautomation.com/t/ignition-maker-edition-via-the-kepware-server-via-opc-ua/79867 "2023-09-29T19:01:54Z")\ **Posts on this page:** 1\ **Showing post:** 14
**Author:** ![Transistor](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/transistor/32/3380_2.png) [@Transistor](https://forum.inductiveautomation.com/u/Transistor)\ **Post date:** [September 30, 2023, 10:33am UTC](https://forum.inductiveautomation.com/t/ignition-maker-edition-via-the-kepware-server-via-opc-ua/79867/14 "2023-09-30T10:33:20Z")
This topic has been cross-posted. > [@How can I make the Ignition Maker Edition adapt to the speed of data transfer between Kepware and the software (matlab) , so that the data is not lost and is displayed correctly in the Ignition Maker Edition curve?](https://forum.inductiveautomation.com/t/how-can-i-make-the-ignition-maker-edition-adapt-to-the-speed-of-data-transfer-between-kepware-and-the-software-matlab-so-that-the-data-is-not-lost-and-is-displayed-correctly-in-the-ignition-maker-edition-curve/79878): > > hi , I hope you're well. I have been sending data between the software (running with a 1ms sample period) and the Ignition Maker Edition via the Kepware. server via OPC UA, but the data is arriving so slowly that I am losing most of it, and when I display it in a curve in the Ignition Maker Edition that does not match the curve in the software, How can I make the Ignition Maker Edition adapt to the speed of data transfer between Kepware. and the software so that the data is not lost and is displ… --- _[View the full topic](https://forum.inductiveautomation.com/t/ignition-maker-edition-via-the-kepware-server-via-opc-ua/79867)._