# Ignition Maker + Jetson Nano+Node-red+GPIO pin control Tutorial

**URL:** <https://forum.inductiveautomation.com/t/ignition-maker-jetson-nano-node-red-gpio-pin-control-tutorial/36873>\
**Category:** Maker\
**Created:** [July 20, 2020, 5:47pm UTC](https://forum.inductiveautomation.com/t/ignition-maker-jetson-nano-node-red-gpio-pin-control-tutorial/36873 "2020-07-20T17:47:48Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![joev](https://avatars.discourse-cdn.com/v4/letter/j/b4bc9f/32.png) [@joev](https://forum.inductiveautomation.com/u/joev)\
**Post date:** [July 20, 2020, 5:47pm UTC](https://forum.inductiveautomation.com/t/ignition-maker-jetson-nano-node-red-gpio-pin-control-tutorial/36873/1 "2020-07-20T17:47:48Z")

</div>

Here is a video that shows how to connect the GPIO pins on jetson Nano to Ignition using the node-red sparkplug module.  
Since the Jetson Nano and Rasbery Pi have simalar GPIO architect this should work also on rasbery PI

[![](https://us1.discourse-cdn.com/inductiveautomation/original/3X/a/8/a88ce1ac8c05dffe0b4ca94f3cf129e14e7ea274.jpeg "Jetson Nano + Ignition HMI + Node-red + GPIO pins") ](https://www.youtube.com/watch?v=QJ4EBMoA2sw)