# Ignition maker node red JSON error

**URL:** <https://forum.inductiveautomation.com/t/ignition-maker-node-red-json-error/36645>\
**Category:** Maker\
**Created:** [July 13, 2020, 3:52pm UTC](https://forum.inductiveautomation.com/t/ignition-maker-node-red-json-error/36645 "2020-07-13T15:52:31Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Post date:** [July 16, 2020, 2:17pm UTC](https://forum.inductiveautomation.com/t/ignition-maker-node-red-json-error/36645/6 "2020-07-16T14:17:17Z")

</div>

You were given an answer on another thread:

> [@Maker and Rasbery pi & Jetson nano GPIO access](http://forum.inductiveautomation.com/t/maker-and-rasbery-pi-jetson-nano-gpio-access/36344/2):
>
> I recommend running the [pigpiod](https://github.com/joan2937/pigpio) daemon and connecting to its socket interface from a long-lived asynchronous thread. The client-side python module for that project looks jython-compatible, but you might want to optimize it. Python’s socket module is notoriously laggy in jython.

If it didn't work for you, an account of your attempt would be helpful to others. If you didn't even try, that's on you.

---

_[View the full topic](https://forum.inductiveautomation.com/t/ignition-maker-node-red-json-error/36645)._