# Ignition Mitsubishi Driver **URL:** \ **Category:** Ignition\ **Created:** [November 4, 2021, 6:08pm UTC](https://forum.inductiveautomation.com/t/ignition-mitsubishi-driver/52740 "2021-11-04T18:08:07Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![franklepkowski](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/franklepkowski/32/4808_2.png) [@franklepkowski](https://forum.inductiveautomation.com/u/franklepkowski)\ **Post date:** [November 4, 2021, 6:08pm UTC](https://forum.inductiveautomation.com/t/ignition-mitsubishi-driver/52740/1 "2021-11-04T18:08:07Z")
Hello, I was wondering if anyone knew where IA was with development of a Mitsubishi driver? I have an upcoming project using a Mitsubishi PLC. Is there any release date posted yet? Thanks, Frank ---
**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\ **Post date:** [November 4, 2021, 6:19pm UTC](https://forum.inductiveautomation.com/t/ignition-mitsubishi-driver/52740/2 "2021-11-04T18:19:55Z")
In progress but I can’t promise any kind of release date. It’s being used as a teaching vehicle for driver development so it’s difficult to estimate how long anything is going to take. Do you know what hardware/models you’ll be working with? ---
**Author:** ![franklepkowski](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/franklepkowski/32/4808_2.png) [@franklepkowski](https://forum.inductiveautomation.com/u/franklepkowski)\ **Post date:** [November 4, 2021, 8:28pm UTC](https://forum.inductiveautomation.com/t/ignition-mitsubishi-driver/52740/3 "2021-11-04T20:28:43Z")
![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/5/a/5afc372774cbef66fdfd3e396c2422ef7601f4c7.png) ---
**Author:** ![Andrew\_Becker](https://avatars.discourse-cdn.com/v4/letter/a/779978/32.png) [@Andrew\_Becker](https://forum.inductiveautomation.com/u/Andrew_Becker)\ **Post date:** [January 4, 2022, 8:22pm UTC](https://forum.inductiveautomation.com/t/ignition-mitsubishi-driver/52740/4 "2022-01-04T20:22:54Z")
I’m also very interested in talking with Mitsubishi PLCs with Ignition. Specifically, Q03UDVCPU. ---
**Author:** ![franklepkowski](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/franklepkowski/32/4808_2.png) [@franklepkowski](https://forum.inductiveautomation.com/u/franklepkowski)\ **Post date:** [January 5, 2022, 1:14pm UTC](https://forum.inductiveautomation.com/t/ignition-mitsubishi-driver/52740/5 "2022-01-05T13:14:41Z")
I am currently using the Kepware Suite to talk to this processor via the onboard ethernet port on the CPU module itself. One down side to this is that the kepware drivers uses the raw tags in the processor and you cannot point to global labels in the processor as tags. This makes things a bit cumbersome when trying to address UDTs in the logic and marry them up with a UDT in ignition. At the moment my UDT members in Ignition are reference type tags pointing to some intermediate tags that read values from the processor. This at least allows me to have clean and concise tags on the Ignition side. Thanks, Frank ---
**Author:** ![AEG](https://avatars.discourse-cdn.com/v4/letter/a/c57346/32.png) [@AEG](https://forum.inductiveautomation.com/u/AEG)\ **Post date:** [February 23, 2022, 10:07pm UTC](https://forum.inductiveautomation.com/t/ignition-mitsubishi-driver/52740/6 "2022-02-23T22:07:24Z")
> [@Kevin.Herron](#): > > Do you know what hardware/models you’ll be working with? We are also very interested in an Ignition Mitsubishi driver. In our lab we have FX2, FX3, QnA series, L series, Q series PLCs and would be willing to do testing on these platforms. ---
**Author:** ![bmusson](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/bmusson/32/87530_2.png) [@bmusson](https://forum.inductiveautomation.com/u/bmusson)\ **Post date:** [February 23, 2022, 10:44pm UTC](https://forum.inductiveautomation.com/t/ignition-mitsubishi-driver/52740/7 "2022-02-23T22:44:03Z")
I’ll put a vote in for this too, specifically Q series. ---
**Author:** ![franklepkowski](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/franklepkowski/32/4808_2.png) [@franklepkowski](https://forum.inductiveautomation.com/u/franklepkowski)\ **Post date:** [February 23, 2022, 11:47pm UTC](https://forum.inductiveautomation.com/t/ignition-mitsubishi-driver/52740/8 "2022-02-23T23:47:16Z")
Hello, I am currently using an R08CPU. Which is an iQ-R series. Fingers crossed the Ignition Mitsu Module can drag and drop structured data types like the Rockwell Automation Control Logix module! Thanks, Frank ---
**Author:** ![christianrauh](https://avatars.discourse-cdn.com/v4/letter/c/6de8d8/32.png) [@christianrauh](https://forum.inductiveautomation.com/u/christianrauh)\ **Post date:** [April 8, 2022, 8:22am UTC](https://forum.inductiveautomation.com/t/ignition-mitsubishi-driver/52740/9 "2022-04-08T08:22:26Z")
I would like to put a vote in on this as well. We would be able to test against R, Q, L and FX5 if it would help. Any possible release dates would be welcome news. ---
**Author:** ![Bee\_Yang](https://avatars.discourse-cdn.com/v4/letter/b/278dde/32.png) [@Bee\_Yang](https://forum.inductiveautomation.com/u/Bee_Yang)\ **Post date:** [April 29, 2022, 2:16pm UTC](https://forum.inductiveautomation.com/t/ignition-mitsubishi-driver/52740/10 "2022-04-29T14:16:55Z")
We also have some Mitsubishi PLC’s that we would love to have working with Ignition. We have FX5U and FX3G. ---
**Author:** ![Yasufumi\_Suganuma](https://avatars.discourse-cdn.com/v4/letter/y/977dab/32.png) [@Yasufumi\_Suganuma](https://forum.inductiveautomation.com/u/Yasufumi_Suganuma)\ **Post date:** [July 27, 2022, 6:45am UTC](https://forum.inductiveautomation.com/t/ignition-mitsubishi-driver/52740/11 "2022-07-27T06:45:21Z")
Hello. I have favor to ask you that We expect to develop OPC UA for mitsubishi PLC Qseries driver direct connection such as Omron FINS/TCP by TCP/IP or UDP… When will you develop it? ---
**Author:** ![m.lee.beavers.ieee](https://avatars.discourse-cdn.com/v4/letter/m/839c29/32.png) [@m.lee.beavers.ieee](https://forum.inductiveautomation.com/u/m.lee.beavers.ieee)\ **Post date:** [December 13, 2022, 8:47pm UTC](https://forum.inductiveautomation.com/t/ignition-mitsubishi-driver/52740/12 "2022-12-13T20:47:40Z")
I will put another vote in for the Q series PLC's we have over 70 controllers we need to connect. Help us Obi-Won, you're our only hope! ---
**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\ **Post date:** [December 13, 2022, 8:53pm UTC](https://forum.inductiveautomation.com/t/ignition-mitsubishi-driver/52740/13 "2022-12-13T20:53:47Z")
We should have a Mitsubishi driver ready in Q1 2023. It will support iQ-R, Q, and L series via ethernet at release. Additional models and serial support will likely come later. ---
**Author:** ![m.lee.beavers.ieee](https://avatars.discourse-cdn.com/v4/letter/m/839c29/32.png) [@m.lee.beavers.ieee](https://forum.inductiveautomation.com/u/m.lee.beavers.ieee)\ **Post date:** [December 14, 2022, 7:42pm UTC](https://forum.inductiveautomation.com/t/ignition-mitsubishi-driver/52740/14 "2022-12-14T19:42:29Z")
That is Great News! Very timely as well. Thank you. ---
**Author:** ![Anthony\_Trotti](https://avatars.discourse-cdn.com/v4/letter/a/a183cd/32.png) [@Anthony\_Trotti](https://forum.inductiveautomation.com/u/Anthony_Trotti)\ **Post date:** [January 5, 2023, 5:58pm UTC](https://forum.inductiveautomation.com/t/ignition-mitsubishi-driver/52740/15 "2023-01-05T17:58:00Z")
How about the IQ-F series? Like the FX5UC series CPU's? Getting ready to install one of those in a project. Any chance on a driver for those sometime this year? ---
**Author:** ![Matthew\_Farmer](https://avatars.discourse-cdn.com/v4/letter/m/e274bd/32.png) [@Matthew\_Farmer](https://forum.inductiveautomation.com/u/Matthew_Farmer)\ **Post date:** [March 6, 2023, 6:32am UTC](https://forum.inductiveautomation.com/t/ignition-mitsubishi-driver/52740/16 "2023-03-06T06:32:28Z")
Is this still planned for Q1 2023? ---
**Author:** ![Joachim](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/joachim/32/86912_2.png) [@Joachim](https://forum.inductiveautomation.com/u/Joachim)\ **Post date:** [March 7, 2023, 9:31am UTC](https://forum.inductiveautomation.com/t/ignition-mitsubishi-driver/52740/17 "2023-03-07T09:31:15Z")
Hi Kevin. Any updates on this? ---
**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\ **Post date:** [March 7, 2023, 1:08pm UTC](https://forum.inductiveautomation.com/t/ignition-mitsubishi-driver/52740/18 "2023-03-07T13:08:26Z")
@Matthew_Farmer @Joachim we’re targeting 8.1.28 unless something comes up in testing. tentative release dates: 8.1.27 - April 25 8.1.28 - May 30 The driver will support these series via ethernet: - MELSEC iQ-R, - MELSEC iQ-F (FX5) - MELSEC-Q - MELSEC-L ---
**Author:** ![Matthew\_Farmer](https://avatars.discourse-cdn.com/v4/letter/m/e274bd/32.png) [@Matthew\_Farmer](https://forum.inductiveautomation.com/u/Matthew_Farmer)\ **Post date:** [March 8, 2023, 4:50am UTC](https://forum.inductiveautomation.com/t/ignition-mitsubishi-driver/52740/19 "2023-03-08T04:50:13Z")
Thanks Kevin, I will be receiving equipment with a Mitsubishi MELSEC-Q series in mid April so the timing is pretty good for me. ---
**Author:** ![Yasufumi\_Suganuma](https://avatars.discourse-cdn.com/v4/letter/y/977dab/32.png) [@Yasufumi\_Suganuma](https://forum.inductiveautomation.com/u/Yasufumi_Suganuma)\ **Post date:** [April 25, 2023, 6:12am UTC](https://forum.inductiveautomation.com/t/ignition-mitsubishi-driver/52740/20 "2023-04-25T06:12:07Z")
Hello Mr.Kevain I would like to confirm as below topics Have you already release them? tentative release dates: 8.1.27 - April 25 8.1.28 - May 30 The driver will support these series via ethernet: - MELSEC iQ-R, - MELSEC iQ-F (FX5) - MELSEC-Q - MELSEC-L [Next page](https://forum.inductiveautomation.com/t/ignition-mitsubishi-driver/52740.md?page=2)