# Ignition modules for KNX and M-Bus?

**URL:** <https://forum.inductiveautomation.com/t/ignition-modules-for-knx-and-m-bus/10875>\
**Category:** 3rd Party Modules\
**Created:** [December 4, 2015, 2:39pm UTC](https://forum.inductiveautomation.com/t/ignition-modules-for-knx-and-m-bus/10875 "2015-12-04T14:39:15Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![flavien](https://avatars.discourse-cdn.com/v4/letter/f/f475e1/32.png) [@flavien](https://forum.inductiveautomation.com/u/flavien)\
**Post date:** [December 4, 2015, 2:39pm UTC](https://forum.inductiveautomation.com/t/ignition-modules-for-knx-and-m-bus/10875/1 "2015-12-04T14:39:15Z")

</div>

Hi everybody,

I would like to connect Ignition gateway to some protocols like KNX, M-Bus and BacNet.  
Is it possible with modules or an other way ?

Thanks,

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [December 4, 2015, 3:15pm UTC](https://forum.inductiveautomation.com/t/ignition-modules-for-knx-and-m-bus/10875/2 "2015-12-04T15:15:35Z")

</div>

Your best bet would be to look for other OPC servers that support these protocols and then connect to those servers with Ignition.