# Ignition network

**URL:** <https://forum.inductiveautomation.com/t/ignition-network/33525>\
**Category:** Ignition\
**Created:** [March 30, 2020, 3:26pm UTC](https://forum.inductiveautomation.com/t/ignition-network/33525 "2020-03-30T15:26:07Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![hicham\_Said](https://avatars.discourse-cdn.com/v4/letter/h/e19adc/32.png) [@hicham\_Said](https://forum.inductiveautomation.com/u/hicham_Said)\
**Post date:** [March 30, 2020, 3:26pm UTC](https://forum.inductiveautomation.com/t/ignition-network/33525/1 "2020-03-30T15:26:07Z")

</div>

Hi,  
I’m new to Ignition SCADA and I created a Perspective Session and I want to view it from another computer (or phone) in the same network but I can’t access to it , any tips please.  
Thank you !

---

<div class="post-metadata">

**Author:** ![brandon1](https://avatars.discourse-cdn.com/v4/letter/b/ea666f/32.png) [@brandon1](https://forum.inductiveautomation.com/u/brandon1)\
**Post date:** [March 30, 2020, 3:26pm UTC](https://forum.inductiveautomation.com/t/ignition-network/33525/2 "2020-03-30T15:26:47Z")

</div>

Make sure your firewall is not blocking the session.

---

<div class="post-metadata">

**Author:** ![hicham\_Said](https://avatars.discourse-cdn.com/v4/letter/h/e19adc/32.png) [@hicham\_Said](https://forum.inductiveautomation.com/u/hicham_Said)\
**Post date:** [March 30, 2020, 4:40pm UTC](https://forum.inductiveautomation.com/t/ignition-network/33525/3 "2020-03-30T16:40:26Z")

</div>

Thank you the problem is that I didin’t create a port forwarding for 8088 on my router 😉