# Ignition Perspective TimeSeriesChart bar display

**URL:** <https://forum.inductiveautomation.com/t/ignition-perspective-timeserieschart-bar-display/35902>\
**Category:** Ignition\
**Created:** [June 23, 2020, 9:20am UTC](https://forum.inductiveautomation.com/t/ignition-perspective-timeserieschart-bar-display/35902 "2020-06-23T09:20:05Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![Phil\_B](https://avatars.discourse-cdn.com/v4/letter/p/c89c15/32.png) [@Phil\_B](https://forum.inductiveautomation.com/u/Phil_B)\
**Post date:** [June 23, 2021, 6:41pm UTC](https://forum.inductiveautomation.com/t/ignition-perspective-timeserieschart-bar-display/35902/5 "2021-06-23T18:41:01Z")

</div>

Hello @joostjojo ,

I just wanted to post how i accomplished your mockup you did in vision but using the perspective XY chart.

Below is a screen shot of a test screen i am working on currently. To get bars layered behind others you just need to copy your x axis so that you have 2 x axis configured (rename the second one so they aren’t the same) then in your series for the data you want behind you use the second x axis and change the z index of your series so that the one you want in the back is 0 and increasing as you move towards the front of the screen. to make the bars wider set the top bars width(under column/appearance) to something you like then on the other series set the width to something slightly larger.

 ![Screen Shot 2021-06-23 at 1.30.10 PM](https://us1.discourse-cdn.com/inductiveautomation/original/3X/8/6/8638d4eca1b56d95c62c441164783d2d456e79f3.png)

---

_[View the full topic](https://forum.inductiveautomation.com/t/ignition-perspective-timeserieschart-bar-display/35902)._