# Ignition Ucanaccess 5.0

**URL:** <https://forum.inductiveautomation.com/t/ignition-ucanaccess-5-0/35462>\
**Category:** Ignition\
**Tags:** database\
**Created:** [June 9, 2020, 4:05pm UTC](https://forum.inductiveautomation.com/t/ignition-ucanaccess-5-0/35462 "2020-06-09T16:05:32Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![jesus.gaxiola](https://avatars.discourse-cdn.com/v4/letter/j/73ab20/32.png) [@jesus.gaxiola](https://forum.inductiveautomation.com/u/jesus.gaxiola)\
**Post date:** [June 9, 2020, 4:05pm UTC](https://forum.inductiveautomation.com/t/ignition-ucanaccess-5-0/35462/1 "2020-06-09T16:05:32Z")

</div>

Hi all

I tried to query a MSAccess database and read that UCanAccess makes the trick… well as Ignition does not support third party codes I did not asked.

our company has a MSDatabase with forms and queries to record some stuffs… UCanaccess 5 and ignition 8 did not connected successful at beginning I googled a lot and not luck at all, the error shown was related to data type… so I start digging into the database table fields… not luck either… at the end I just split the database and magically UCanAccess shows connection as Valid and was able to query the database…

Hope it helps some others.  
Regards  
Jesus