# Ignition Vision OPTO 22 groov Epic SNAP PAC Driver Questions

**URL:** <https://forum.inductiveautomation.com/t/ignition-vision-opto-22-groov-epic-snap-pac-driver-questions/79818>\
**Category:** Ignition\
**Tags:** vision\
**Created:** [September 29, 2023, 4:25am UTC](https://forum.inductiveautomation.com/t/ignition-vision-opto-22-groov-epic-snap-pac-driver-questions/79818 "2023-09-29T04:25:12Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Ben\_Eklund](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/ben_eklund/32/40758_2.png) [@Ben\_Eklund](https://forum.inductiveautomation.com/u/Ben_Eklund)\
**Post date:** [October 4, 2023, 9:52pm UTC](https://forum.inductiveautomation.com/t/ignition-vision-opto-22-groov-epic-snap-pac-driver-questions/79818/2 "2023-10-04T21:52:04Z")

</div>

Hello, I was able to locate this post which seems similar: [OPC UA - Opto 22 groov EPIC and SNAP PAC](https://forum.inductiveautomation.com/t/opc-ua-opto-22-groov-epic-and-snap-pac/36736).

Generally it looks like this driver can connect, but not necessarily directly to the device's IO cards. If this is an issue, Opto 22 has a workaround to connect to the cards included in that forum reply as well.

If you have additional questions on these Opto22 devices, or drivers, you can find Opto22's forum here: [https://forums.opto22.com/](https://forums.opto22.com/), and their training here: [Opto22 - PAC Control Basic](https://www.opto22.com/support/resources-tools/downloads/pac_control_basic), as linked by Benson on that previous forum post. Good luck with these new devices!

---

_[View the full topic](https://forum.inductiveautomation.com/t/ignition-vision-opto-22-groov-epic-snap-pac-driver-questions/79818)._