# Igntion Upgrading **URL:** \ **Category:** Ignition\ **Created:** [December 17, 2013, 5:04pm UTC](https://forum.inductiveautomation.com/t/igntion-upgrading/7720 "2013-12-17T17:04:31Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![alexr](https://avatars.discourse-cdn.com/v4/letter/a/8dc957/32.png) [@alexr](https://forum.inductiveautomation.com/u/alexr)\ **Post date:** [December 17, 2013, 5:04pm UTC](https://forum.inductiveautomation.com/t/igntion-upgrading/7720/1 "2013-12-17T17:04:31Z")
Hi, I want to upgrade my projects of FactoryPMI V3.3.4 in Igntion V7.6.4, but the restore task remains in progress and I can´t continue (as following in the picture). Any idea? ---
**Author:** ![Colby.Clegg](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/colby.clegg/32/3282_2.png) [@Colby.Clegg](https://forum.inductiveautomation.com/u/Colby.Clegg)\ **Post date:** [January 15, 2014, 7:21pm UTC](https://forum.inductiveautomation.com/t/igntion-upgrading/7720/2 "2014-01-15T19:21:34Z")
Hi, Could you maybe try a different browser? Seems like a strange issue, since the console message says “done”. If it still doesn’t work, you could email your backup to support (or contact them for a case number to upload it to), and we could try to run the conversion here. Regards, ---
**Author:** ![alexr](https://avatars.discourse-cdn.com/v4/letter/a/8dc957/32.png) [@alexr](https://forum.inductiveautomation.com/u/alexr)\ **Post date:** [January 20, 2014, 4:50pm UTC](https://forum.inductiveautomation.com/t/igntion-upgrading/7720/3 "2014-01-20T16:50:38Z")
Thanks for the suggestions Colby, I followed the instructions of the Greg Simpson and the Upgrade Ignition have been OK: I would suggest doing incremental upgrades to 7.6.4. Do not jump directly to the latest release. I would suggest upgrading from FPMI to 7.2.11, then 7.4.4, then 7.5.11, then 7.6.4. There were changes along the way to the Python library along with other changes. Regards, Alejandro Rodríguez