# Image control in Designer

**URL:** <https://forum.inductiveautomation.com/t/image-control-in-designer/2201>\
**Category:** Ignition\
**Created:** [September 15, 2010, 8:33pm UTC](https://forum.inductiveautomation.com/t/image-control-in-designer/2201 "2010-09-15T20:33:10Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![rooks](https://avatars.discourse-cdn.com/v4/letter/r/ce7236/32.png) [@rooks](https://forum.inductiveautomation.com/u/rooks)\
**Post date:** [September 15, 2010, 8:33pm UTC](https://forum.inductiveautomation.com/t/image-control-in-designer/2201/1 "2010-09-15T20:33:10Z")

</div>

I am trying to make an image visible/not visible with mouse entered/exited. Any suggestions?

---

<div class="post-metadata">

**Author:** ![Travis.Cox](https://avatars.discourse-cdn.com/v4/letter/t/b9bd4f/32.png) [@Travis.Cox](https://forum.inductiveautomation.com/u/Travis.Cox)\
**Post date:** [September 15, 2010, 8:38pm UTC](https://forum.inductiveautomation.com/t/image-control-in-designer/2201/2 "2010-09-15T20:38:26Z")

</div>

You are going to have to put a rectangle over the image and put the mouse entered, exited script on it. Once a component is invisible the mouse events no longer work.

---

<div class="post-metadata">

**Author:** ![rooks](https://avatars.discourse-cdn.com/v4/letter/r/ce7236/32.png) [@rooks](https://forum.inductiveautomation.com/u/rooks)\
**Post date:** [September 15, 2010, 8:41pm UTC](https://forum.inductiveautomation.com/t/image-control-in-designer/2201/3 "2010-09-15T20:41:15Z")

</div>

That’s the problem that I was running into. I’ll try adding the rectangle. Thanks.