# Image display in designer but not after launch project **URL:** \ **Category:** Ignition\ **Created:** [December 1, 2021, 5:06pm UTC](https://forum.inductiveautomation.com/t/image-display-in-designer-but-not-after-launch-project/53631 "2021-12-01T17:06:44Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [December 1, 2021, 5:13pm UTC](https://forum.inductiveautomation.com/t/image-display-in-designer-but-not-after-launch-project/53631/2 "2021-12-01T17:13:59Z")
The image is from a different server than the Perspective server? If so, you must deal with browser security for cross-origin resources. (This is not specific to Perspective.) This discussion is about embedding Perspective into a separate server's web page, but the issues are symmetric: > [@Embedding Session in a Webpage](https://forum.inductiveautomation.com/t/embedding-session-in-a-webpage/50200): > > I’m creating a project that will be used for advertising purposes on our website. I’ve setup my project with some Perspective views and configured the views to Public security. When I navigate to the endpoint for my session directly, Perspective loads and everything is displayed as normal, but when I embed the session into a very basic HTML page, it did not initially load due to it’s X-Frame-Options being set to same-origin. To resolve this, I used [this article](https://support.inductiveautomation.com/hc/en-us/articles/360047578031-Gateway-Security-HTTP-Headers-and-Configuration) from the support website to disabl… The simplest solution is to host your image in Ignition, not a separate server. --- _[View the full topic](https://forum.inductiveautomation.com/t/image-display-in-designer-but-not-after-launch-project/53631)._