# Import ignition tag directly from plc and still showing as bad **URL:** \ **Category:** Ignition\ **Created:** [December 9, 2024, 5:57pm UTC](https://forum.inductiveautomation.com/t/import-ignition-tag-directly-from-plc-and-still-showing-as-bad/99598 "2024-12-09T17:57:53Z")\ **Posts on this page:** 1\ **Showing post:** 12
**Author:** ![JordanCClark](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jordancclark/32/83362_2.png) [@JordanCClark](https://forum.inductiveautomation.com/u/JordanCClark)\ **Post date:** [December 9, 2024, 7:33pm UTC](https://forum.inductiveautomation.com/t/import-ignition-tag-directly-from-plc-and-still-showing-as-bad/99598/12 "2024-12-09T19:33:31Z")
Is this looking directly at an AOI? AOIs are notorious for performance issues. > [@Cannot read some tags inside Rockwell AOI](https://forum.inductiveautomation.com/t/cannot-read-some-tags-inside-rockwell-aoi/38393/3): > > What Mike said, but also: Don't. All AOI's have EnableIn and EnableOut booleans that are locked to "Hidden" and therefore prevent most optimization of the data traffic to read instances of these data types. Ignition's Logix driver cannot do bulk reads on AOIs. Do very much of this and your Logix driver will choke. I strongly recommend that any AOI you design yourself use one or more InOut parameters of another data type, with instances of those datatypes elsewhere. Place all of your extern… --- _[View the full topic](https://forum.inductiveautomation.com/t/import-ignition-tag-directly-from-plc-and-still-showing-as-bad/99598)._