# Import SVG in Navigation Bar

**URL:** <https://forum.inductiveautomation.com/t/import-svg-in-navigation-bar/4949>\
**Category:** Ignition\
**Created:** [August 7, 2012, 7:41pm UTC](https://forum.inductiveautomation.com/t/import-svg-in-navigation-bar/4949 "2012-08-07T19:41:59Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![tamerplc](https://avatars.discourse-cdn.com/v4/letter/t/d78d45/32.png) [@tamerplc](https://forum.inductiveautomation.com/u/tamerplc)\
**Post date:** [August 7, 2012, 7:41pm UTC](https://forum.inductiveautomation.com/t/import-svg-in-navigation-bar/4949/1 "2012-08-07T19:41:59Z")

</div>

Dear  
i tried so many time to import SVG in Navigation bar . it is imported without any problem but once i run the project as aclient the location of the phot is changed .  
For example if i remove ignition logo from navigation bar and replace it with anther SVG photo.the photo appeared in different location.you can test  
attached  
photo 1 is the design Launch  
Photo 2 is the client launch  
i don’t know what is the problem.Please advise??  
Regards,  
Tamer  
 ![](https://us1.discourse-cdn.com/inductiveautomation/original/2X/8/8f663fa31a5079aa96b7da3a3295b17edb8f30fe.JPG)

 ![](https://us1.discourse-cdn.com/inductiveautomation/original/2X/0/0f27233f859e57c38629d099b64833791aa7e202.JPG)

---

<div class="post-metadata">

**Author:** ![greg.simpson](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/greg.simpson/32/3135_2.png) [@greg.simpson](https://forum.inductiveautomation.com/u/greg.simpson)\
**Post date:** [August 7, 2012, 8:08pm UTC](https://forum.inductiveautomation.com/t/import-svg-in-navigation-bar/4949/2 "2012-08-07T20:08:03Z")

</div>

You need to change the layout constraints of the image. Either right click and select layout or press Ctrl+L, then select Anchored then select the top and left arrows.