# Importing Modbus registers

**URL:** <https://forum.inductiveautomation.com/t/importing-modbus-registers/86033>\
**Category:** Ignition\
**Created:** [February 20, 2024, 4:47pm UTC](https://forum.inductiveautomation.com/t/importing-modbus-registers/86033 "2024-02-20T16:47:23Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Akshay\_Vora](https://avatars.discourse-cdn.com/v4/letter/a/bc8723/32.png) [@Akshay\_Vora](https://forum.inductiveautomation.com/u/Akshay_Vora)\
**Post date:** [February 20, 2024, 4:47pm UTC](https://forum.inductiveautomation.com/t/importing-modbus-registers/86033/1 "2024-02-20T16:47:23Z")

</div>

Hello,

I have a 5 modbus devices with the register defined all same as follows

Binary Points  
QTY registers - 125  
Start address - 999  
type -read holding register

Float  
QTY -60  
Start address - 10023  
type -read holding register

Writing Binary  
Qty - 2  
Start address - 5573  
type - Write multiple registers

Is there an easier way to import and create a tag name same as register name.  
Other than defining addresses individually in address configuration