# In a report, is it possible to make a table push down components depending on its length?

**URL:** <https://forum.inductiveautomation.com/t/in-a-report-is-it-possible-to-make-a-table-push-down-components-depending-on-its-length/78250>\
**Category:** Ignition\
**Created:** [August 22, 2023, 6:37pm UTC](https://forum.inductiveautomation.com/t/in-a-report-is-it-possible-to-make-a-table-push-down-components-depending-on-its-length/78250 "2023-08-22T18:37:10Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Christy\_Jean](https://avatars.discourse-cdn.com/v4/letter/c/977dab/32.png) [@Christy\_Jean](https://forum.inductiveautomation.com/u/Christy_Jean)\
**Post date:** [August 22, 2023, 6:37pm UTC](https://forum.inductiveautomation.com/t/in-a-report-is-it-possible-to-make-a-table-push-down-components-depending-on-its-length/78250/1 "2023-08-22T18:37:10Z")

</div>

I have a table in a report that will vary in size with a separate table under it. I'd like to have the first table push the second table "LOT CHANGES" into a new page instead of skipping over it like it's doing in this example:  
[report.pdf](https://forum.inductiveautomation.com/uploads/short-url/rjJtDMlIVXBcLkFYNOi6V990pkZ.pdf) (89.6 KB)

---

<div class="post-metadata">

**Author:** ![zacht](https://avatars.discourse-cdn.com/v4/letter/z/ea5d25/32.png) [@zacht](https://forum.inductiveautomation.com/u/zacht)\
**Post date:** [August 22, 2023, 6:57pm UTC](https://forum.inductiveautomation.com/t/in-a-report-is-it-possible-to-make-a-table-push-down-components-depending-on-its-length/78250/2 "2023-08-22T18:57:29Z")

</div>

You need a [table group](https://docs.inductiveautomation.com/display/DOC81/Table+Groups). Specifically, you need [peer tables](https://docs.inductiveautomation.com/display/DOC81/Table+Groups/#TableGroups-PeerTables).

---

<div class="post-metadata">

**Author:** ![Christy\_Jean](https://avatars.discourse-cdn.com/v4/letter/c/977dab/32.png) [@Christy\_Jean](https://forum.inductiveautomation.com/u/Christy_Jean)\
**Post date:** [August 22, 2023, 7:17pm UTC](https://forum.inductiveautomation.com/t/in-a-report-is-it-possible-to-make-a-table-push-down-components-depending-on-its-length/78250/3 "2023-08-22T19:17:41Z")

</div>

This works, thank you!