# Indirect limits for several moving analog indicators

**URL:** <https://forum.inductiveautomation.com/t/indirect-limits-for-several-moving-analog-indicators/18905>\
**Category:** Ignition\
**Tags:** ignition79\
**Created:** [July 19, 2018, 9:15pm UTC](https://forum.inductiveautomation.com/t/indirect-limits-for-several-moving-analog-indicators/18905 "2018-07-19T21:15:18Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![filipg](https://avatars.discourse-cdn.com/v4/letter/f/a88e4f/32.png) [@filipg](https://forum.inductiveautomation.com/u/filipg)\
**Post date:** [July 19, 2018, 9:15pm UTC](https://forum.inductiveautomation.com/t/indirect-limits-for-several-moving-analog-indicators/18905/1 "2018-07-19T21:15:18Z")

</div>

I am using several moving analog indicators to monitor a cyclic process (9 stages) - so all limits for each moving indicator change 9 times per cycle.

What is the best way to code this into the moving analog indicators? The limits are static for each stage, so I can pre-define them.

Currently, I defined a folder of tags for each stage of the cycle and pick from these as stage changes. But, is there a better way? Can you tell me what you’ve used/would recommend? Thank you.