# Individual Components on XY View with Mode: Percent

**URL:** <https://forum.inductiveautomation.com/t/individual-components-on-xy-view-with-mode-percent/32859>\
**Category:** Ignition\
**Tags:** perspective\
**Created:** [March 5, 2020, 9:30pm UTC](https://forum.inductiveautomation.com/t/individual-components-on-xy-view-with-mode-percent/32859 "2020-03-05T21:30:55Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![jaspinall](https://avatars.discourse-cdn.com/v4/letter/j/a587f6/32.png) [@jaspinall](https://forum.inductiveautomation.com/u/jaspinall)\
**Post date:** [March 5, 2020, 9:30pm UTC](https://forum.inductiveautomation.com/t/individual-components-on-xy-view-with-mode-percent/32859/1 "2020-03-05T21:30:55Z")

</div>

Hi All:

I am just wondering if there is a way to set individual components to not stretch when you have a XY View setup in mode: percent? i.e have certain components setup at a fixed width/height while the rest scale? Or is this not possible?

Thank You

---

<div class="post-metadata">

**Author:** ![kirsten.chambers](https://avatars.discourse-cdn.com/v4/letter/k/48db29/32.png) [@kirsten.chambers](https://forum.inductiveautomation.com/u/kirsten.chambers)\
**Post date:** [March 5, 2020, 9:35pm UTC](https://forum.inductiveautomation.com/t/individual-components-on-xy-view-with-mode-percent/32859/2 "2020-03-05T21:35:33Z")

</div>

What you can do is set your Coordinate Container to `fixed` rather than `percent`. Then, for each component in that container, you can put in a percentage for its height/width/position properties as needed while leaving the other properties as pixel values if you don’t want it to stretch or move in that direction.

For example, this has a constant height and y-position while stretching horizontally as the view width increases:  
 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/2X/4/4c73423605ae52b643a0cd0fab224b51bd726aa1.png)

---

<div class="post-metadata">

**Author:** ![jaspinall](https://avatars.discourse-cdn.com/v4/letter/j/a587f6/32.png) [@jaspinall](https://forum.inductiveautomation.com/u/jaspinall)\
**Post date:** [March 5, 2020, 9:45pm UTC](https://forum.inductiveautomation.com/t/individual-components-on-xy-view-with-mode-percent/32859/3 "2020-03-05T21:45:54Z")

</div>

Perfect - thank you.