# Inductive University Perspective Column Container Video: Number of Columns Instruction Update

**URL:** <https://forum.inductiveautomation.com/t/inductive-university-perspective-column-container-video-number-of-columns-instruction-update/26759>\
**Category:** General Discussion\
**Tags:** ignition80\
**Created:** [July 22, 2019, 4:14pm UTC](https://forum.inductiveautomation.com/t/inductive-university-perspective-column-container-video-number-of-columns-instruction-update/26759 "2019-07-22T16:14:47Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![mattjdial](https://avatars.discourse-cdn.com/v4/letter/m/ea666f/32.png) [@mattjdial](https://forum.inductiveautomation.com/u/mattjdial)\
**Post date:** [July 22, 2019, 4:14pm UTC](https://forum.inductiveautomation.com/t/inductive-university-perspective-column-container-video-number-of-columns-instruction-update/26759/1 "2019-07-22T16:14:47Z")

</div>

Hi there Inductive Folks,

It goes without saying, I'm glad to see that the IU 8.x videos are up, furthering this awesome resource you provide.

I just spent unnecessary time trying to figure out why I wasn't seeing the same Perspective Column View root property "container" as described in the video, only to find a reference in the forum back in May mentioning that it had been removed for various reasons.

> [@Change no. of Column in Column Container](http://forum.inductiveautomation.com/t/change-no-of-column-in-column-container/25040):
>
> I just started in perspective module using 8.01 version. I can’t find the way to change no. of Column in Column Container. did i miss something?

Just a head's up, also, is there a centralized place for IU feedback? Maybe it deserves it's own branch in the forums?

Thanks,  
Matthew

---

<div class="post-metadata">

**Author:** ![paul-griffith](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/paul-griffith/32/37249_2.png) [@paul-griffith](https://forum.inductiveautomation.com/u/paul-griffith)\
**Post date:** [July 22, 2019, 4:32pm UTC](https://forum.inductiveautomation.com/t/inductive-university-perspective-column-container-video-number-of-columns-instruction-update/26759/2 "2019-07-22T16:32:15Z")

</div>

IU feedback typically goes onto the “ideas” portal, specifically the “Website Feedback” area (see: [https://ideas.inductiveautomation.com/website-feedback/p/column-container-video-still-references-columns-property](https://ideas.inductiveautomation.com/website-feedback/p/column-container-video-still-references-columns-property))

But, in this case… try to cut the training department some slack. They’re currently all-hands-on-deck working on the 8.0 certification test - though I know for sure they’re aware of the issue on this particular video.

---

<div class="post-metadata">

**Author:** ![mattjdial](https://avatars.discourse-cdn.com/v4/letter/m/ea666f/32.png) [@mattjdial](https://forum.inductiveautomation.com/u/mattjdial)\
**Post date:** [July 22, 2019, 6:20pm UTC](https://forum.inductiveautomation.com/t/inductive-university-perspective-column-container-video-number-of-columns-instruction-update/26759/3 "2019-07-22T18:20:30Z")

</div>

Paul,

Thanks for directing me to the ideas page, I did scan that …canny.io landing page, but I didn’t correlate the Website Feedback and IU as being in the same bucket.

Apologies if my point came across as not recognizing the effort put into IU, I do, and appreciate it, and was only trying to assist having not found that it had already been identified.

Thanks for the prompt reply,  
Matthew