# Infinity Icon showing in place of very large number **URL:** \ **Category:** Ignition\ **Tags:** vision\ **Created:** [October 1, 2021, 6:47pm UTC](https://forum.inductiveautomation.com/t/infinity-icon-showing-in-place-of-very-large-number/51546 "2021-10-01T18:47:00Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![Dmart](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/dmart/32/13427_2.png) [@Dmart](https://forum.inductiveautomation.com/u/Dmart)\ **Post date:** [October 1, 2021, 6:47pm UTC](https://forum.inductiveautomation.com/t/infinity-icon-showing-in-place-of-very-large-number/51546/1 "2021-10-01T18:47:00Z")
I have noticed that sometimes a very large number is displayed as an Infinity logo. Haven’t quite figured out when this does and doesn’t happen. I didn’t think it was in a specific version of ignition, but my 2 examples are from difference versions. Anyone that has worked with AB’s PlantPAX AOI’s knows that the default value for an alarm limit is +/- 1.5e+038 which in turn basically just means it hasn’t been set, or it’s not used. Here are 2 faceplates (all the same code behind them.) The first is from 7.9.13 and it shows an Infinity Icon on the 2 large numbers. I really like this, as it better portrays that these are not being used. ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/c/9/c992e10f390900f9c477e00d1ac2b87499c833ea.png) The second is is from 8.1.4 (It was originally just imported from a 7.9.13 backup with minor changes.) No more infinity icon, now it just shows the large number, but cut off. ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/e/5/e545037a48ca14b83c1fcecadf2e1f4f08b13feb.png) Any thoughts on how I can get the infinity icon to automatically populate again? In all reality, this doesn’t affect anything, just a nice to have… 🙂 Thanks ---
**Author:** ![nminchin](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/nminchin/32/6911_2.png) [@nminchin](https://forum.inductiveautomation.com/u/nminchin)\ **Post date:** [October 2, 2021, 9:06am UTC](https://forum.inductiveautomation.com/t/infinity-icon-showing-in-place-of-very-large-number/51546/2 "2021-10-02T09:06:57Z")
I’m surprised PlantPAX doesn’t have bools turn turn each of the alarms off to be honest, seems like a good thing to have 🤔 As for your question, 🤷‍♂️ ---
**Author:** ![lrose](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/lrose/32/62724_2.png) [@lrose](https://forum.inductiveautomation.com/u/lrose)\ **Post date:** [October 2, 2021, 12:36pm UTC](https://forum.inductiveautomation.com/t/infinity-icon-showing-in-place-of-very-large-number/51546/3 "2021-10-02T12:36:20Z")
> [@nminchin](#): > > I’m surprised PlantPAX doesn’t have bools turn turn each of the alarms off to be honest, seems like a good thing to have 🤔 @nminchin Don't go asking AB programmers to use logic Nick. ---
**Author:** ![Dmart](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/dmart/32/13427_2.png) [@Dmart](https://forum.inductiveautomation.com/u/Dmart)\ **Post date:** [October 2, 2021, 2:49pm UTC](https://forum.inductiveautomation.com/t/infinity-icon-showing-in-place-of-very-large-number/51546/4 "2021-10-02T14:49:56Z")
They do have bools to turn each alarm off and on, But that doesn’t have anything to do with the question I’ve asked. 🙂 The setpoint as always there regardless of the alarm being on or not. ---
**Author:** ![nminchin](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/nminchin/32/6911_2.png) [@nminchin](https://forum.inductiveautomation.com/u/nminchin)\ **Post date:** [October 2, 2021, 7:39pm UTC](https://forum.inductiveautomation.com/t/infinity-icon-showing-in-place-of-very-large-number/51546/5 "2021-10-02T19:39:39Z")
I thought so! I haven’t used PlantPAX before, but know there are like 500+ tags for a single analogue input instrument, so some of those _must_ be alarm enables 😁