# Install 7.3 with Vision Module 4 **URL:** \ **Category:** Ignition\ **Created:** [October 10, 2011, 7:19pm UTC](https://forum.inductiveautomation.com/t/install-7-3-with-vision-module-4/3408 "2011-10-10T19:19:13Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![Jonathan](https://avatars.discourse-cdn.com/v4/letter/j/aeb1de/32.png) [@Jonathan](https://forum.inductiveautomation.com/u/Jonathan)\ **Post date:** [October 10, 2011, 7:19pm UTC](https://forum.inductiveautomation.com/t/install-7-3-with-vision-module-4/3408/1 "2011-10-10T19:19:13Z")
Is this possible? I just tried upgrading my development machine by unchecking the vision module. After the installation completed my vision module version 4 was missing. Will I not be able to get the Vision gateway updates unless I upgrade my Vision module? From the change log the new features of Vision module 5 seem to center around ability to draw and work with shapes. If we don’t plan on drawing shapes are we missing out on anything Vision module 5 has to offer? Is the template feature available? On our SQLBridge servers I was able to upgrade to 7.3 without any problem. It is really great to see the memory usage improved for our tags. If I cannot upgrade our vision module servers, would there be any issue with running 7.2.9 on the Vision servers and running 7.3.0 on the SQLBridge servers? Thank you, ---
**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\ **Post date:** [October 10, 2011, 10:41pm UTC](https://forum.inductiveautomation.com/t/install-7-3-with-vision-module-4/3408/2 "2011-10-10T22:41:27Z")
We’re considering releasing a Vision 4 module for 7.3, but there may be some technical hurdles that prevent it. You should be fine running some 7.2.x servers for Vision and 7.3 for SQLBridge.