# Install Edge IIOT

**URL:** <https://forum.inductiveautomation.com/t/install-edge-iiot/90530>\
**Category:** Ignition\
**Tags:** ignition81\
**Created:** [May 16, 2024, 10:31pm UTC](https://forum.inductiveautomation.com/t/install-edge-iiot/90530 "2024-05-16T22:31:14Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Matrix\_Engineering](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/matrix_engineering/32/19781_2.png) [@Matrix\_Engineering](https://forum.inductiveautomation.com/u/Matrix_Engineering)\
**Post date:** [May 16, 2024, 10:31pm UTC](https://forum.inductiveautomation.com/t/install-edge-iiot/90530/1 "2024-05-16T22:31:14Z")

</div>

I have installed Edge 8.1.35, I want to use Edge IIOT license not panel.

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/7/a/7aea295dd121e7508ae4f7526d0962513161ecc2.png)

The page says IIOT is available, clicking install takes you to the modules install page, but I don't see a separate IIOT module on the IA or Cirrus Link website?

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [May 16, 2024, 10:42pm UTC](https://forum.inductiveautomation.com/t/install-edge-iiot/90530/2 "2024-05-16T22:42:09Z")

</div>

There isn't an "IIoT Module", the editions are just combinations of licensing and existing modules.

---

<div class="post-metadata">

**Author:** ![Matrix\_Engineering](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/matrix_engineering/32/19781_2.png) [@Matrix\_Engineering](https://forum.inductiveautomation.com/u/Matrix_Engineering)\
**Post date:** [May 16, 2024, 10:55pm UTC](https://forum.inductiveautomation.com/t/install-edge-iiot/90530/3 "2024-05-16T22:55:19Z")

</div>

OK, thanks for the clarification... bit misleading that there is a button to install it that takes you to the module installer page...

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [May 16, 2024, 10:56pm UTC](https://forum.inductiveautomation.com/t/install-edge-iiot/90530/4 "2024-05-16T22:56:20Z")

</div>

That might be to give you an opportunity to install the modules it mentions require manual installation. Not sure.