# Install error

**URL:** <https://forum.inductiveautomation.com/t/install-error/1449>\
**Category:** Ignition\
**Created:** [January 27, 2010, 8:00pm UTC](https://forum.inductiveautomation.com/t/install-error/1449 "2010-01-27T20:00:22Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![mws2674](https://avatars.discourse-cdn.com/v4/letter/m/958977/32.png) [@mws2674](https://forum.inductiveautomation.com/u/mws2674)\
**Post date:** [January 27, 2010, 8:00pm UTC](https://forum.inductiveautomation.com/t/install-error/1449/1 "2010-01-27T20:00:22Z")

</div>

Received the following error message on install:

[quote]Problem Running Post Install Step  
C:\Program Files\Inductive Automation\Ignition\haspinst.exe -install -nomsg[/quote]

The installation finished and Ignition appears to be functioning properly, but wanted to make you aware of this error.

---

<div class="post-metadata">

**Author:** ![Carl.Gould](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/carl.gould/32/7262_2.png) [@Carl.Gould](https://forum.inductiveautomation.com/u/Carl.Gould)\
**Post date:** [January 27, 2010, 9:08pm UTC](https://forum.inductiveautomation.com/t/install-error/1449/2 "2010-01-27T21:08:29Z")

</div>

Thank you. This shouldn’t affect the install - that step is for the USB licensing driver.

Can you please report the details of your operating system version and computer?

---

<div class="post-metadata">

**Author:** ![mws2674](https://avatars.discourse-cdn.com/v4/letter/m/958977/32.png) [@mws2674](https://forum.inductiveautomation.com/u/mws2674)\
**Post date:** [January 27, 2010, 9:27pm UTC](https://forum.inductiveautomation.com/t/install-error/1449/3 "2010-01-27T21:27:02Z")

</div>

Windows Vista 32bit SP2 on HP xw6600 Workstation - Intel Xeon, 2 gig Ram.

I had a suspicion that this error was possibly an issue with aladdin hasp as I use a usb hardware key for some rockwell software … So that probably caused the conflict with the install.

---

<div class="post-metadata">

**Author:** ![Carl.Gould](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/carl.gould/32/7262_2.png) [@Carl.Gould](https://forum.inductiveautomation.com/u/Carl.Gould)\
**Post date:** [January 27, 2010, 10:00pm UTC](https://forum.inductiveautomation.com/t/install-error/1449/4 "2010-01-27T22:00:40Z")

</div>

Yeah that must have been it. We’ll have to see if we can detect this on install.

---

<div class="post-metadata">

**Author:** ![mws2674](https://avatars.discourse-cdn.com/v4/letter/m/958977/32.png) [@mws2674](https://forum.inductiveautomation.com/u/mws2674)\
**Post date:** [January 27, 2010, 10:55pm UTC](https://forum.inductiveautomation.com/t/install-error/1449/5 "2010-01-27T22:55:03Z")

</div>

This would probably be a rare occurance as most people will be installing on a dedicated ignition box instead of a workstation. I’m still in the tinkering phases as I am new to Inductive Automation.