# Installation on windows 7 pro

**URL:** <https://forum.inductiveautomation.com/t/installation-on-windows-7-pro/47807>\
**Category:** Ignition\
**Created:** [June 15, 2021, 8:39pm UTC](https://forum.inductiveautomation.com/t/installation-on-windows-7-pro/47807 "2021-06-15T20:39:16Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Francisco.Mejia](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/francisco.mejia/32/63246_2.png) [@Francisco.Mejia](https://forum.inductiveautomation.com/u/Francisco.Mejia)\
**Post date:** [June 15, 2021, 8:39pm UTC](https://forum.inductiveautomation.com/t/installation-on-windows-7-pro/47807/1 "2021-06-15T20:39:17Z")

</div>

I just downloaded the last version of Ignition and installed on a windows 7 pro it completed the installation successfully but al I see in the menu is an uninstall entry. What is happening?

Thanks  
Francisco

---

<div class="post-metadata">

**Author:** ![YF129701](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/yf129701/32/60498_2.png) [@YF129701](https://forum.inductiveautomation.com/u/YF129701)\
**Post date:** [June 15, 2021, 8:47pm UTC](https://forum.inductiveautomation.com/t/installation-on-windows-7-pro/47807/2 "2021-06-15T20:47:33Z")

</div>

Can you try going to the gateway to see if the service is running? Something like `localhost:8088` in a web browser should do it.

---

<div class="post-metadata">

**Author:** ![JordanCClark](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jordancclark/32/83362_2.png) [@JordanCClark](https://forum.inductiveautomation.com/u/JordanCClark)\
**Post date:** [June 15, 2021, 11:05pm UTC](https://forum.inductiveautomation.com/t/installation-on-windows-7-pro/47807/3 "2021-06-15T23:05:37Z")

</div>

Also the gateway control panel is no more. You’ll need to run the command line tools.

---

<div class="post-metadata">

**Author:** ![Francisco.Mejia](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/francisco.mejia/32/63246_2.png) [@Francisco.Mejia](https://forum.inductiveautomation.com/u/Francisco.Mejia)\
**Post date:** [June 16, 2021, 3:34pm UTC](https://forum.inductiveautomation.com/t/installation-on-windows-7-pro/47807/4 "2021-06-16T15:34:27Z")

</div>

thank you very much. I also wanted to know how to separate deployment file and application file. Is there a way to know that?

Thanks again