# Installing Ignition Edge 8.0.3 on the same computer that has Ignition 8.0.3

**URL:** <https://forum.inductiveautomation.com/t/installing-ignition-edge-8-0-3-on-the-same-computer-that-has-ignition-8-0-3/28182>\
**Category:** Ignition\
**Created:** [September 11, 2019, 5:34pm UTC](https://forum.inductiveautomation.com/t/installing-ignition-edge-8-0-3-on-the-same-computer-that-has-ignition-8-0-3/28182 "2019-09-11T17:34:02Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![James.Lorenz](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/james.lorenz/32/3290_2.png) [@James.Lorenz](https://forum.inductiveautomation.com/u/James.Lorenz)\
**Post date:** [September 13, 2019, 6:15pm UTC](https://forum.inductiveautomation.com/t/installing-ignition-edge-8-0-3-on-the-same-computer-that-has-ignition-8-0-3/28182/4 "2019-09-13T18:15:44Z")

</div>

If you’re trying to have two gateways installed on the same machine, you’ll need to make sure they have different service names, otherwise you’ll see issues installing the service. In `ignition.conf`, there’s a property near the end of the file called `wrapper.name` - for the Edge install, you’ll want to change that to something other than `Ignition` so it doesn’t clash with the service name for the Ignition install. After making that change, you can properly install the service.

If you want the gateways to run at the same time, you’ll need to modify `data/gateway.xml` in the Edge install directory to use different ports than the Ignition install.

---

_[View the full topic](https://forum.inductiveautomation.com/t/installing-ignition-edge-8-0-3-on-the-same-computer-that-has-ignition-8-0-3/28182)._