# Integrating Ignition with Triangle Microworks Scada Data Gateway

**URL:** <https://forum.inductiveautomation.com/t/integrating-ignition-with-triangle-microworks-scada-data-gateway/99583>\
**Category:** Ignition\
**Created:** [December 9, 2024, 2:22pm UTC](https://forum.inductiveautomation.com/t/integrating-ignition-with-triangle-microworks-scada-data-gateway/99583 "2024-12-09T14:22:52Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Marshall\_Tickner](https://avatars.discourse-cdn.com/v4/letter/m/bb73d2/32.png) [@Marshall\_Tickner](https://forum.inductiveautomation.com/u/Marshall_Tickner)\
**Post date:** [December 9, 2024, 2:22pm UTC](https://forum.inductiveautomation.com/t/integrating-ignition-with-triangle-microworks-scada-data-gateway/99583/1 "2024-12-09T14:22:52Z")

</div>

Has anyone had experience using Triangle Microworks SCADA Data Gateway? We are currently using an Ignition edge gateway to communicate with a SISCO server in order to communicate to ISOs over ICCP. According to what I have found the SCADA data gateway could do the work of the SISCO server along with the Ignition Edge to communicate data between our main ignition instance and the ISOs.

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [December 9, 2024, 2:40pm UTC](https://forum.inductiveautomation.com/t/integrating-ignition-with-triangle-microworks-scada-data-gateway/99583/2 "2024-12-09T14:40:23Z")

</div>

I haven't actually tried it, but I have recommended it as a possible option for people who need to get IEC 60870 data into Ignition.

The connection from Ignition to TMW SDG should be easy - it's just an OPC UA connection.