# Intermec Mobile Computer

**URL:** <https://forum.inductiveautomation.com/t/intermec-mobile-computer/4476>\
**Category:** General Discussion\
**Created:** [May 15, 2012, 4:26pm UTC](https://forum.inductiveautomation.com/t/intermec-mobile-computer/4476 "2012-05-15T16:26:18Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![TimE](https://avatars.discourse-cdn.com/v4/letter/t/ee59a6/32.png) [@TimE](https://forum.inductiveautomation.com/u/TimE)\
**Post date:** [May 15, 2012, 4:26pm UTC](https://forum.inductiveautomation.com/t/intermec-mobile-computer/4476/1 "2012-05-15T16:26:18Z")

</div>

Just received a call from our IT department asking if an Intermec mobile computer will run my projects. I am not that familiar with these units. Does anyone have any comments if it will work without the mobile module?

Operating System  
Microsoft Windows Embedded Handheld built on Windows 6.5.3 technology

[http://www.intermec.com/products/cmptrcn70a/index.aspx](http://www.intermec.com/products/cmptrcn70a/index.aspx)  
Thanks

---

<div class="post-metadata">

**Author:** ![Greg.Buehler](https://avatars.discourse-cdn.com/v4/letter/g/ecc23a/32.png) [@Greg.Buehler](https://forum.inductiveautomation.com/u/Greg.Buehler)\
**Post date:** [May 15, 2012, 4:34pm UTC](https://forum.inductiveautomation.com/t/intermec-mobile-computer/4476/2 "2012-05-15T16:34:04Z")

</div>

Unfortuntaly, no. Ignition requires Java Standard Edition but only Java Machine Edition is available on the Windows 6.5 platform.