# IP camera issue

**URL:** <https://forum.inductiveautomation.com/t/ip-camera-issue/66023>\
**Category:** Ignition\
**Tags:** vision\
**Created:** [November 2, 2022, 6:55pm UTC](https://forum.inductiveautomation.com/t/ip-camera-issue/66023 "2022-11-02T18:55:38Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![athayer](https://avatars.discourse-cdn.com/v4/letter/a/eb8c5e/32.png) [@athayer](https://forum.inductiveautomation.com/u/athayer)\
**Post date:** [November 2, 2022, 6:55pm UTC](https://forum.inductiveautomation.com/t/ip-camera-issue/66023/1 "2022-11-02T18:55:38Z")

</div>

I am trying to use the Web Browser in Vision.  
I am getting an 'ERR\_CERT\_AUTHORITY\_INVALID' error.  
I get the same error when using Microsoft Edge but I can override it.  
Is there any way to do this via the Vision Web Browser?

---

<div class="post-metadata">

**Author:** ![plo](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/plo/32/33875_2.png) [@plo](https://forum.inductiveautomation.com/u/plo)\
**Post date:** [November 9, 2022, 9:38pm UTC](https://forum.inductiveautomation.com/t/ip-camera-issue/66023/2 "2022-11-09T21:38:51Z")

</div>

Hello athayer,

I would suggest opening a Support Ticket to help investigate if the Web Browser supports the extra popup prompt. [Support Home Page | Inductive Automation](https://inductiveautomation.com/support/home/)

Have you tested with the IP Camera Viewer?  
[Vision - IP Camera Viewer - Ignition User Manual 8.1 - Ignition Documentation](https://docs.inductiveautomation.com/display/DOC81/Vision+-+IP+Camera+Viewer)