# IP Camera Viewer IIOException: No SOF segment in stream

**URL:** <https://forum.inductiveautomation.com/t/ip-camera-viewer-iioexception-no-sof-segment-in-stream/92460>\
**Category:** Ignition\
**Created:** [June 27, 2024, 12:25pm UTC](https://forum.inductiveautomation.com/t/ip-camera-viewer-iioexception-no-sof-segment-in-stream/92460 "2024-06-27T12:25:31Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Patrick\_O\_Connor](https://avatars.discourse-cdn.com/v4/letter/p/ebca7d/32.png) [@Patrick\_O\_Connor](https://forum.inductiveautomation.com/u/Patrick_O_Connor)\
**Post date:** [June 27, 2024, 12:25pm UTC](https://forum.inductiveautomation.com/t/ip-camera-viewer-iioexception-no-sof-segment-in-stream/92460/1 "2024-06-27T12:25:31Z")

</div>

I am using ACTi cameras and the ones that are run PoE work fine, but the coax cameras via encoder work for about 30seconds and then gives the IIOException. Any ideas as to what I can do to remedy this?  
The URL i am using is [http://10.170.133.11:80/cgi-bin/encoder?USER=XXXX&PWD=XXXX&CHANNEL=6&STREAM=2&GET\_STREAM](http://10.170.133.11:80/cgi-bin/encoder?USER=XXXX&PWD=XXXX&CHANNEL=6&STREAM=2&GET_STREAM)