# Is it possible to access SCADA on the web instead of the Vision client launcher?

**URL:** <https://forum.inductiveautomation.com/t/is-it-possible-to-access-scada-on-the-web-instead-of-the-vision-client-launcher/83882>\
**Category:** Ignition\
**Tags:** ignition81, vision\
**Created:** [January 6, 2024, 8:08am UTC](https://forum.inductiveautomation.com/t/is-it-possible-to-access-scada-on-the-web-instead-of-the-vision-client-launcher/83882 "2024-01-06T08:08:16Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Govind\_Suthar1](https://avatars.discourse-cdn.com/v4/letter/g/a87d85/32.png) [@Govind\_Suthar1](https://forum.inductiveautomation.com/u/Govind_Suthar1)\
**Post date:** [January 6, 2024, 8:08am UTC](https://forum.inductiveautomation.com/t/is-it-possible-to-access-scada-on-the-web-instead-of-the-vision-client-launcher/83882/1 "2024-01-06T08:08:16Z")

</div>

Helo friends,

A total of 8 different machines are connected to the ignition vison module and its UI is accessed through the vision client launcher. But, I want to access a specific one machine controlled via web instead of vision client launcher.

---

<div class="post-metadata">

**Author:** ![michael.flagler](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/michael.flagler/32/26272_2.png) [@michael.flagler](https://forum.inductiveautomation.com/u/michael.flagler)\
**Post date:** [January 6, 2024, 2:26pm UTC](https://forum.inductiveautomation.com/t/is-it-possible-to-access-scada-on-the-web-instead-of-the-vision-client-launcher/83882/2 "2024-01-06T14:26:02Z")

</div>

You'd have to purchase and install the Perspective module for that machine. If it's Edge, you can switch modes to Perspective instead of Vision, but you'd have to rewrite/redesign all your screens in Perspective no matter how you go about it.

---

<div class="post-metadata">

**Author:** ![Govind\_Suthar1](https://avatars.discourse-cdn.com/v4/letter/g/a87d85/32.png) [@Govind\_Suthar1](https://forum.inductiveautomation.com/u/Govind_Suthar1)\
**Post date:** [January 8, 2024, 5:25am UTC](https://forum.inductiveautomation.com/t/is-it-possible-to-access-scada-on-the-web-instead-of-the-vision-client-launcher/83882/3 "2024-01-08T05:25:00Z")

</div>

OK,  
Thanks for the reply.