# Is it possible to make the reconnection to PLC devices manully **URL:** \ **Category:** Ignition\ **Tags:** ignition80\ **Created:** [December 28, 2021, 9:23am UTC](https://forum.inductiveautomation.com/t/is-it-possible-to-make-the-reconnection-to-plc-devices-manully/54483 "2021-12-28T09:23:15Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![jeff.li](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jeff.li/32/68813_2.png) [@jeff.li](https://forum.inductiveautomation.com/u/jeff.li)\ **Post date:** [December 28, 2021, 9:23am UTC](https://forum.inductiveautomation.com/t/is-it-possible-to-make-the-reconnection-to-plc-devices-manully/54483/1 "2021-12-28T09:23:15Z")
I ask this question because in my Ignition gateway, totally I have around 100 devices connected by Omron Fins/TCP driver, and for example if there are couple of devices powered off, then it will make all another existing devices communication time to be very long, from gateway write a value to one tag need more than 20 seconds, but if I disabled powered off devices, then the communication time will come back, so I assume this probelm is caused by gateway always wants to retry to connect to the no power device and eat a lot of resources, so I want to know is it possibel to make the retry not automatically but manully or can be by a script way thanks a lot! ---
**Author:** ![Matrix\_Engineering](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/matrix_engineering/32/19781_2.png) [@Matrix\_Engineering](https://forum.inductiveautomation.com/u/Matrix_Engineering)\ **Post date:** [December 28, 2021, 12:43pm UTC](https://forum.inductiveautomation.com/t/is-it-possible-to-make-the-reconnection-to-plc-devices-manully/54483/2 "2021-12-28T12:43:00Z")
[https://docs.inductiveautomation.com/display/DOC81/system.device.setDeviceEnabled](https://docs.inductiveautomation.com/display/DOC81/system.device.setDeviceEnabled)