# Is there any reference on monitoring cell phone antennas?

**URL:** <https://forum.inductiveautomation.com/t/is-there-any-reference-on-monitoring-cell-phone-antennas/98864>\
**Category:** General Discussion\
**Created:** [November 20, 2024, 2:21pm UTC](https://forum.inductiveautomation.com/t/is-there-any-reference-on-monitoring-cell-phone-antennas/98864 "2024-11-20T14:21:36Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![rdigiovambattista](https://avatars.discourse-cdn.com/v4/letter/r/2acd7d/32.png) [@rdigiovambattista](https://forum.inductiveautomation.com/u/rdigiovambattista)\
**Post date:** [November 20, 2024, 2:21pm UTC](https://forum.inductiveautomation.com/t/is-there-any-reference-on-monitoring-cell-phone-antennas/98864/1 "2024-11-20T14:21:36Z")

</div>

I need to connect 4500 RTUs to Ignition

---

<div class="post-metadata">

**Author:** ![Transistor](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/transistor/32/3380_2.png) [@Transistor](https://forum.inductiveautomation.com/u/Transistor)\
**Post date:** [November 20, 2024, 3:10pm UTC](https://forum.inductiveautomation.com/t/is-there-any-reference-on-monitoring-cell-phone-antennas/98864/2 "2024-11-20T15:10:41Z")

</div>

Your question title asks about cell phone antennas.  
Your post mentions 4500 RTU, which sounds like you are asking about how to connect ICP DAS [G-4500 RTU -Intelligent GPRS Remote Terminal Unit](http://ftp.icpdas.com/pub/cd/usbcd/napdos/m2m/rtu/G-4500_RTU/manual/g-4500RTU_datasheet_EN.pdf).

1. What exactly are you trying to do?
2. What have you tried?
3. Where are you stuck?

---

<div class="post-metadata">

**Author:** ![rdigiovambattista](https://avatars.discourse-cdn.com/v4/letter/r/2acd7d/32.png) [@rdigiovambattista](https://forum.inductiveautomation.com/u/rdigiovambattista)\
**Post date:** [November 20, 2024, 4:39pm UTC](https://forum.inductiveautomation.com/t/is-there-any-reference-on-monitoring-cell-phone-antennas/98864/3 "2024-11-20T16:39:01Z")

</div>

I need to monitor the alarms of 4500 cell phone towers

---

<div class="post-metadata">

**Author:** ![Matrix\_Engineering](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/matrix_engineering/32/19781_2.png) [@Matrix\_Engineering](https://forum.inductiveautomation.com/u/Matrix_Engineering)\
**Post date:** [November 20, 2024, 4:44pm UTC](https://forum.inductiveautomation.com/t/is-there-any-reference-on-monitoring-cell-phone-antennas/98864/4 "2024-11-20T16:44:16Z")

</div>

Detail in your question promotes detail in our answers.

Provide an SLD or a paragraph not a one liner.

---

<div class="post-metadata">

**Author:** ![Transistor](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/transistor/32/3380_2.png) [@Transistor](https://forum.inductiveautomation.com/u/Transistor)\
**Post date:** [November 20, 2024, 5:01pm UTC](https://forum.inductiveautomation.com/t/is-there-any-reference-on-monitoring-cell-phone-antennas/98864/5 "2024-11-20T17:01:04Z")

</div>

You didn't answer my questions, 1, 2 & 3. We can't help you.

1. Are you saying you want to monitor the alarms of four thousand, five hundred cell phone towers?
2. Or are you trying to use a G-4500 RTU?

---

<div class="post-metadata">

**Author:** ![rdigiovambattista](https://avatars.discourse-cdn.com/v4/letter/r/2acd7d/32.png) [@rdigiovambattista](https://forum.inductiveautomation.com/u/rdigiovambattista)\
**Post date:** [November 20, 2024, 8:26pm UTC](https://forum.inductiveautomation.com/t/is-there-any-reference-on-monitoring-cell-phone-antennas/98864/6 "2024-11-20T20:26:41Z")

</div>

the answers is 4  
but I need to use 4500 RTUs installed in the cell phone towers to adquire the alarms