# Issue with the perspective component .modl file

**URL:** <https://forum.inductiveautomation.com/t/issue-with-the-perspective-component-modl-file/106690>\
**Category:** Module Development\
**Tags:** ignition81, perspective\
**Created:** [May 26, 2025, 1:08pm UTC](https://forum.inductiveautomation.com/t/issue-with-the-perspective-component-modl-file/106690 "2025-05-26T13:08:24Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![dalibor.jaksic](https://avatars.discourse-cdn.com/v4/letter/d/ebca7d/32.png) [@dalibor.jaksic](https://forum.inductiveautomation.com/u/dalibor.jaksic)\
**Post date:** [May 26, 2025, 1:08pm UTC](https://forum.inductiveautomation.com/t/issue-with-the-perspective-component-modl-file/106690/1 "2025-05-26T13:08:24Z")

</div>

Ignition is reporting warnings that its "Unable to find registered components" in status log after start/restart with the installed .modl file.  
Check the issue on Github [ignition-sdk-examples](https://github.com/inductiveautomation/ignition-sdk-examples)

> <https://github.com/inductiveautomation/ignition-sdk-examples/issues/121>
>
> I have installed fresh Ignition Gateway and compiled fresh .modl file from the e…xamples provided in this repo. 
> Installed that .modl to Ignition and used "tagcounter" & "displayimage" perspective components in the designer.
> When I start/restart the Ignition gateway, there are warnings from \`Perspective.ProjectConfig\` with the description \`Unable to find registered component for id="..."\`
> 
> Now this is a problem because we use many perspective components which are added to the same module file and these all work fine but when the gateway is started/restarted we get around 50 pages of warnings with 100 entries per page (more then 5000 instances which clogs the status log)
> 
> Steps to reproduce the bug:
> 1. Install fresh version of Ignition (8.1.45 used)
> 2. Build .modl file from the \[link\](https://github.com/inductiveautomation/ignition-sdk-examples/tree/master/perspective-component)
> 3. Install that .modl file in Ignition
> 4. In designer open a new project and use components from the .modl file provided (tagcounter or any other) save the project
> 5. Restart Ignition service 
> 6. Go to status -\> log -\> filter for "rad.display" and you will find warnings