# Issues with DNP3 Driver reconnection

**URL:** <https://forum.inductiveautomation.com/t/issues-with-dnp3-driver-reconnection/34187>\
**Category:** Ignition\
**Tags:** ignition79, ignition80\
**Created:** [April 24, 2020, 8:41am UTC](https://forum.inductiveautomation.com/t/issues-with-dnp3-driver-reconnection/34187 "2020-04-24T08:41:48Z")\
**Posts on this page:** 1\
**Showing post:** 16

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [October 27, 2023, 3:36am UTC](https://forum.inductiveautomation.com/t/issues-with-dnp3-driver-reconnection/34187/16 "2023-10-27T03:36:26Z")

</div>

> [@New DNP3 Driver Beta](https://forum.inductiveautomation.com/t/new-dnp3-driver-beta/80774):
>
> The beta module for the new DNP3 driver is available [here](https://www.dropbox.com/scl/fi/h0odl91a3om7pznfaaxag/DNP3-Driver-Beta.modl?rlkey=f15frzm54t8z8vyghweezpyls&dl=0). It requires Ignition 8.1.33. It installs along side the existing DNP3 driver - it does not replace it, and it will not replace it in the future. If you're familiar with DNP3 already there shouldn't be much of a learning curve here. The basic configuration settings look the same. The primary difference between this driver and the old driver is that it acquires data using class-based polling by default, as opposed to explicit READ functi…

---

_[View the full topic](https://forum.inductiveautomation.com/t/issues-with-dnp3-driver-reconnection/34187)._