# Jetson Nano and designerlauncher

**URL:** <https://forum.inductiveautomation.com/t/jetson-nano-and-designerlauncher/42215>\
**Category:** Maker\
**Created:** [January 13, 2021, 5:34pm UTC](https://forum.inductiveautomation.com/t/jetson-nano-and-designerlauncher/42215 "2021-01-13T17:34:39Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![xavier.abaziou](https://avatars.discourse-cdn.com/v4/letter/x/f6c823/32.png) [@xavier.abaziou](https://forum.inductiveautomation.com/u/xavier.abaziou)\
**Post date:** [January 13, 2021, 5:34pm UTC](https://forum.inductiveautomation.com/t/jetson-nano-and-designerlauncher/42215/1 "2021-01-13T17:34:39Z")

</div>

Hello, I’ve installed Ignition Maker Edition (8.1.1 Aarch64 bit version) on a jetson nano.  
Is it possible to run the designerlauncher on the nano? I tried to launch but nothing appends (no error message neither)

---

<div class="post-metadata">

**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Post date:** [January 13, 2021, 5:39pm UTC](https://forum.inductiveautomation.com/t/jetson-nano-and-designerlauncher/42215/2 "2021-01-13T17:39:33Z")

</div>

If it is at all like an RPi, I suspect you can’t. Missing JavaFX, IIRC.