# Label Printing from ignition using Videojet 9550 with Zpl over TCP/IP

**URL:** <https://forum.inductiveautomation.com/t/label-printing-from-ignition-using-videojet-9550-with-zpl-over-tcp-ip/87230>\
**Category:** Ignition\
**Created:** [March 12, 2024, 11:17pm UTC](https://forum.inductiveautomation.com/t/label-printing-from-ignition-using-videojet-9550-with-zpl-over-tcp-ip/87230 "2024-03-12T23:17:06Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![ukamani](https://avatars.discourse-cdn.com/v4/letter/u/d9b06d/32.png) [@ukamani](https://forum.inductiveautomation.com/u/ukamani)\
**Post date:** [March 13, 2024, 7:52pm UTC](https://forum.inductiveautomation.com/t/label-printing-from-ignition-using-videojet-9550-with-zpl-over-tcp-ip/87230/6 "2024-03-13T19:52:06Z")

</div>

Another question. I saw this post here where it says you can print to Zebra using HTTPS:

> [@Send ZPL command to Zebra 170PAX4 via TCP/IP Socket](https://forum.inductiveautomation.com/t/send-zpl-command-to-zebra-170pax4-via-tcp-ip-socket/6003/10):
>
> Please note that there is a much simpler way to communicate with Zebra nowadays using HTTP. [https://km.zebra.com/kb/index?page=content&id=WH133&actp=LIST](https://km.zebra.com/kb/index?page=content&id=WH133&actp=LIST)

Do you think the same will work for Videojet?Maybe a code like so:

```auto
#assuming i have the printerIP and zpl code
# Create an Http Client Object
client = system.net.httpClient()
# Send the command
response = client.post('http://%s:9100/pstprnt' %printerIP, data=zpl)
statusCode = response.getStatusCode()

```

---

_[View the full topic](https://forum.inductiveautomation.com/t/label-printing-from-ignition-using-videojet-9550-with-zpl-over-tcp-ip/87230)._