# Labview

**URL:** <https://forum.inductiveautomation.com/t/labview/9561>\
**Category:** General Discussion\
**Created:** [January 17, 2015, 11:46pm UTC](https://forum.inductiveautomation.com/t/labview/9561 "2015-01-17T23:46:52Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tobey](https://avatars.discourse-cdn.com/v4/letter/t/34f0e0/32.png) [@Tobey](https://forum.inductiveautomation.com/u/Tobey)\
**Post date:** [January 17, 2015, 11:46pm UTC](https://forum.inductiveautomation.com/t/labview/9561/1 "2015-01-17T23:46:52Z")

</div>

Has anyone connected Ignition to Labview via Kepware to communicate with CAN networks?

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [January 20, 2015, 3:48pm UTC](https://forum.inductiveautomation.com/t/labview/9561/2 "2015-01-20T15:48:01Z")

</div>

How does Kepware come into play here?

If you just want to connect to Kepware that’s pretty straightforward - just a new OPC-UA or OPC-DA connection.