# Learning about Networking

**URL:** <https://forum.inductiveautomation.com/t/learning-about-networking/116175>\
**Category:** General Discussion\
**Created:** [June 26, 2026, 7:08pm UTC](https://forum.inductiveautomation.com/t/learning-about-networking/116175 "2026-06-26T19:08:34Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![ryanbeck](https://avatars.discourse-cdn.com/v4/letter/r/ea666f/32.png) [@ryanbeck](https://forum.inductiveautomation.com/u/ryanbeck)\
**Post date:** [June 26, 2026, 7:08pm UTC](https://forum.inductiveautomation.com/t/learning-about-networking/116175/1 "2026-06-26T19:08:34Z")

</div>

Hey I am just getting started learning about networking basics (switches, routers, servers, etc.). I was curious if anyone had any tips on potential beginner projects or resources to read to try to get a better grasp on the content. Thanks!

---

<div class="post-metadata">

**Author:** ![David\_Stone](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/david_stone/32/79749_2.png) [@David\_Stone](https://forum.inductiveautomation.com/u/David_Stone)\
**Post date:** [June 26, 2026, 8:51pm UTC](https://forum.inductiveautomation.com/t/learning-about-networking/116175/2 "2026-06-26T20:51:45Z")

</div>

Have a go at the Network+ and Cisco CCNA course documents, they have a full end to end learning for networking.

---

<div class="post-metadata">

**Author:** ![lane.duncan](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/lane.duncan/32/83700_2.png) [@lane.duncan](https://forum.inductiveautomation.com/u/lane.duncan)\
**Post date:** [June 27, 2026, 6:31am UTC](https://forum.inductiveautomation.com/t/learning-about-networking/116175/3 "2026-06-27T06:31:45Z")

</div>

I have found the more popular courses on Udemy are well worth the $20.