# Legacy and Pipeline Notification

**URL:** <https://forum.inductiveautomation.com/t/legacy-and-pipeline-notification/7712>\
**Category:** General Discussion\
**Created:** [December 16, 2013, 4:08pm UTC](https://forum.inductiveautomation.com/t/legacy-and-pipeline-notification/7712 "2013-12-16T16:08:39Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![mikehill100](https://avatars.discourse-cdn.com/v4/letter/m/bcef8e/32.png) [@mikehill100](https://forum.inductiveautomation.com/u/mikehill100)\
**Post date:** [December 16, 2013, 4:08pm UTC](https://forum.inductiveautomation.com/t/legacy-and-pipeline-notification/7712/1 "2013-12-16T16:08:39Z")

</div>

Hello,

I am in the process of converting a customer over from legacy to the new notification. When I make a tag to test out the new pipeline it still forwards all the stuff through the legacy. Is there a way I can turn that off so it only uses the pipeline?

Thanks,

Mike

---

<div class="post-metadata">

**Author:** ![mikehill100](https://avatars.discourse-cdn.com/v4/letter/m/bcef8e/32.png) [@mikehill100](https://forum.inductiveautomation.com/u/mikehill100)\
**Post date:** [December 16, 2013, 4:19pm UTC](https://forum.inductiveautomation.com/t/legacy-and-pipeline-notification/7712/2 "2013-12-16T16:19:13Z")

</div>

Would creating a new notification profile solve the problem?

---

<div class="post-metadata">

**Author:** ![Colby.Clegg](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/colby.clegg/32/3282_2.png) [@Colby.Clegg](https://forum.inductiveautomation.com/u/Colby.Clegg)\
**Post date:** [December 16, 2013, 4:28pm UTC](https://forum.inductiveautomation.com/t/legacy-and-pipeline-notification/7712/3 "2013-12-16T16:28:25Z")

</div>

Hi,

You should be able to edit each legacy notification profile in the gateway and “disable” it. Once everything is up and running, you can go back and remove them.

Regards,