# Limiting Gateway Access

**URL:** <https://forum.inductiveautomation.com/t/limiting-gateway-access/70312>\
**Category:** Ignition\
**Created:** [February 24, 2023, 8:43pm UTC](https://forum.inductiveautomation.com/t/limiting-gateway-access/70312 "2023-02-24T20:43:36Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![mathieurleblanc33](https://avatars.discourse-cdn.com/v4/letter/m/e19adc/32.png) [@mathieurleblanc33](https://forum.inductiveautomation.com/u/mathieurleblanc33)\
**Post date:** [February 24, 2023, 8:43pm UTC](https://forum.inductiveautomation.com/t/limiting-gateway-access/70312/1 "2023-02-24T20:43:36Z")

</div>

Hi All,

I am using Ignition 8.1.23.  
I was wondering if there was a way to segregate access in the gateway between the Status and Config Page. I want to provide a client's IT access to the Gateway Status page but not provide them access to the Gateway Configuration page. I assume there is a way to do this but not sure how to setup. Anyone run into this?

---

<div class="post-metadata">

**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Post date:** [February 24, 2023, 9:17pm UTC](https://forum.inductiveautomation.com/t/limiting-gateway-access/70312/2 "2023-02-24T21:17:54Z")

</div>

Look under Config =\> Security =\> General.