# Line Curve Guide Snap

**URL:** <https://forum.inductiveautomation.com/t/line-curve-guide-snap/76941>\
**Category:** Ignition\
**Tags:** ignition81, vision\
**Created:** [July 26, 2023, 12:37pm UTC](https://forum.inductiveautomation.com/t/line-curve-guide-snap/76941 "2023-07-26T12:37:25Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![coffee732](https://avatars.discourse-cdn.com/v4/letter/c/b9e5f3/32.png) [@coffee732](https://forum.inductiveautomation.com/u/coffee732)\
**Post date:** [July 26, 2023, 12:37pm UTC](https://forum.inductiveautomation.com/t/line-curve-guide-snap/76941/1 "2023-07-26T12:37:25Z")

</div>

When creating a path with a curved edge, how do I get the curve guides to snap-to-grid so I can create a symmetrical curve?

---

<div class="post-metadata">

**Author:** ![nminchin](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/nminchin/32/6911_2.png) [@nminchin](https://forum.inductiveautomation.com/u/nminchin)\
**Post date:** [July 26, 2023, 12:39pm UTC](https://forum.inductiveautomation.com/t/line-curve-guide-snap/76941/2 "2023-07-26T12:39:45Z")

</div>

> [@coffee732](#):
>
> curve guides

Are you talking about the path nodes? And is this vision? I don't think nodes or node bezier handles support any gridline snapping

---

<div class="post-metadata">

**Author:** ![coffee732](https://avatars.discourse-cdn.com/v4/letter/c/b9e5f3/32.png) [@coffee732](https://forum.inductiveautomation.com/u/coffee732)\
**Post date:** [July 26, 2023, 12:42pm UTC](https://forum.inductiveautomation.com/t/line-curve-guide-snap/76941/3 "2023-07-26T12:42:46Z")

</div>

![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/3/a/3ad89f68227a389b0680b1f1db7115755cf3f381.png)

The little drag points highlighted with red circles.  
Yes, this is vision.

---

<div class="post-metadata">

**Author:** ![nminchin](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/nminchin/32/6911_2.png) [@nminchin](https://forum.inductiveautomation.com/u/nminchin)\
**Post date:** [July 26, 2023, 12:44pm UTC](https://forum.inductiveautomation.com/t/line-curve-guide-snap/76941/4 "2023-07-26T12:44:56Z")

</div>

Yeah, they don't support snapping. I always draw vector graphics in Inkscape

---

<div class="post-metadata">

**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Post date:** [July 26, 2023, 12:46pm UTC](https://forum.inductiveautomation.com/t/line-curve-guide-snap/76941/5 "2023-07-26T12:46:23Z")

</div>

> [@nminchin](#):
>
> I always draw vector graphics in Inkscape

Meh. Real coders use the Paintable Canvas.

/me runs away