# List of Quality Codes

**URL:** <https://forum.inductiveautomation.com/t/list-of-quality-codes/8839>\
**Category:** Ignition\
**Created:** [August 1, 2014, 1:48pm UTC](https://forum.inductiveautomation.com/t/list-of-quality-codes/8839 "2014-08-01T13:48:59Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![PeterThornton](https://avatars.discourse-cdn.com/v4/letter/p/da6949/32.png) [@PeterThornton](https://forum.inductiveautomation.com/u/PeterThornton)\
**Post date:** [August 1, 2014, 1:48pm UTC](https://forum.inductiveautomation.com/t/list-of-quality-codes/8839/1 "2014-08-01T13:48:59Z")

</div>

Where can I get a complete list of the numerical quality codes stored in the “dataintegrity” column of the sqlt\_data\_xx historical tables and their description?

I assume these are the same as the SQLTag quality codes?

---

<div class="post-metadata">

**Author:** ![Paul.Scott](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/paul.scott/32/4578_2.png) [@Paul.Scott](https://forum.inductiveautomation.com/u/Paul.Scott)\
**Post date:** [August 5, 2014, 12:14am UTC](https://forum.inductiveautomation.com/t/list-of-quality-codes/8839/2 "2014-08-05T00:14:24Z")

</div>

You should be able to find them in the manual: [Quality Overlays](https://inductiveautomation.com/support/usermanuals/ignition/quality_overlays.htm)

You are correct in that the “dataintegrity” column of the sqlt\_data\_xx tables matches with the codes on that section of the manual. The only code not shown is 192, which is good quality.