# Local Time Change Help **URL:** \ **Category:** Ignition\ **Created:** [September 1, 2022, 7:59pm UTC](https://forum.inductiveautomation.com/t/local-time-change-help/63696 "2022-09-01T19:59:05Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![Alejandro\_Delgado](https://avatars.discourse-cdn.com/v4/letter/a/3da27b/32.png) [@Alejandro\_Delgado](https://forum.inductiveautomation.com/u/Alejandro_Delgado)\ **Post date:** [September 1, 2022, 7:59pm UTC](https://forum.inductiveautomation.com/t/local-time-change-help/63696/1 "2022-09-01T19:59:05Z")
Hello Currently using 7.9.16 ignition and noticed on the easy chart it is using GMT time rather than using my current PST time and was wondering what would be the fix for that so that way instead of constantly subtracting those 6-7 hours it’ll just go ahead and display my current time ---
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [September 1, 2022, 8:10pm UTC](https://forum.inductiveautomation.com/t/local-time-change-help/63696/2 "2022-09-01T20:10:29Z")
There’s a time zone setting in project properties. ---
**Author:** ![Paul\_Verbovshchuk](https://avatars.discourse-cdn.com/v4/letter/p/f0a364/32.png) [@Paul\_Verbovshchuk](https://forum.inductiveautomation.com/u/Paul_Verbovshchuk)\ **Post date:** [September 1, 2022, 8:10pm UTC](https://forum.inductiveautomation.com/t/local-time-change-help/63696/3 "2022-09-01T20:10:35Z")
You can set the project's time zone property, similar question linked. > [@Easy Chart and timezones](https://forum.inductiveautomation.com/t/easy-chart-and-timezones/1194/2): > > You should just have to set the project’s “Time Zone” property (in the designer, click on the root node of the project browser and it will appear in the property table) to “Client Timezone”