# Location of numeric keypad

**URL:** <https://forum.inductiveautomation.com/t/location-of-numeric-keypad/3129>\
**Category:** Ignition\
**Created:** [July 25, 2011, 6:11pm UTC](https://forum.inductiveautomation.com/t/location-of-numeric-keypad/3129 "2011-07-25T18:11:47Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![alex.ferrell](https://avatars.discourse-cdn.com/v4/letter/a/958977/32.png) [@alex.ferrell](https://forum.inductiveautomation.com/u/alex.ferrell)\
**Post date:** [July 25, 2011, 6:11pm UTC](https://forum.inductiveautomation.com/t/location-of-numeric-keypad/3129/1 "2011-07-25T18:11:47Z")

</div>

When I use the built-in numeric keypad it is popping up way at the bottom of the screen- actually a little off my Ignition screen and going underneath the Windows taskbar. Is there any way to control where the keypad is located?

---

<div class="post-metadata">

**Author:** ![Carl.Gould](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/carl.gould/32/7262_2.png) [@Carl.Gould](https://forum.inductiveautomation.com/u/Carl.Gould)\
**Post date:** [July 25, 2011, 10:02pm UTC](https://forum.inductiveautomation.com/t/location-of-numeric-keypad/3129/2 "2011-07-25T22:02:28Z")

</div>

Could it be that you're not running 7.2.7? From the 7.2.7 release notes:

> [@The Changelog](#):
>
> Fixed - Bug that caused the popup keyboard to be about 30px too low off the bottom of the screen.

---

<div class="post-metadata">

**Author:** ![alex.ferrell](https://avatars.discourse-cdn.com/v4/letter/a/958977/32.png) [@alex.ferrell](https://forum.inductiveautomation.com/u/alex.ferrell)\
**Post date:** [July 25, 2011, 10:04pm UTC](https://forum.inductiveautomation.com/t/location-of-numeric-keypad/3129/3 "2011-07-25T22:04:19Z")

</div>

Nope, it’s 7.2.7 alright- build 170.

---

<div class="post-metadata">

**Author:** ![Carl.Gould](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/carl.gould/32/7262_2.png) [@Carl.Gould](https://forum.inductiveautomation.com/u/Carl.Gould)\
**Post date:** [July 26, 2011, 5:33pm UTC](https://forum.inductiveautomation.com/t/location-of-numeric-keypad/3129/4 "2011-07-26T17:33:06Z")

</div>

Ok, I see what the problem is. The fix I mentioned was only applied to the alpha numeric keyboard popup, but the same issue also affected the numeric keypad. This has been fixed for 7.2.8.