# Logix 5000 and RS Linx configuration

**URL:** <https://forum.inductiveautomation.com/t/logix-5000-and-rs-linx-configuration/3058>\
**Category:** General Discussion\
**Created:** [July 2, 2011, 2:29am UTC](https://forum.inductiveautomation.com/t/logix-5000-and-rs-linx-configuration/3058 "2011-07-02T02:29:14Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![rockerz062008](https://avatars.discourse-cdn.com/v4/letter/r/65b543/32.png) [@rockerz062008](https://forum.inductiveautomation.com/u/rockerz062008)\
**Post date:** [July 2, 2011, 2:29am UTC](https://forum.inductiveautomation.com/t/logix-5000-and-rs-linx-configuration/3058/1 "2011-07-02T02:29:14Z")

</div>

Greetings all!  
I visited with Vanessa and the web demo was awesome but am having trouble connecting my Control Logix processor to the system. I am not sure if the standard OPC UA driver will work… Cause I cant get it to? or if I need to use the RS Linx Driver.  
Is there any tutorials or knowbase docs?  
This should not be that hard? I am sure I missing something.  
P.S.  
My CLX is ip is 192.168.1.204 in slot 11 and my processor is in slot 0  
Thanks in advance.

---

<div class="post-metadata">

**Author:** ![rockerz062008](https://avatars.discourse-cdn.com/v4/letter/r/65b543/32.png) [@rockerz062008](https://forum.inductiveautomation.com/u/rockerz062008)\
**Post date:** [July 3, 2011, 4:12am UTC](https://forum.inductiveautomation.com/t/logix-5000-and-rs-linx-configuration/3058/2 "2011-07-03T04:12:51Z")

</div>

Ok… I got it!  
I had been using an L62, L55, and L1 processor and could not connect??  
Then I hooked up my L43 processor which has been running a Simulation program and it connected!  
Wow, Next I noticed all my Control Logix processors did not have a program loaded.  
My Bad.  
FYI, always make sure your processor has a program loaded.  
Thanks!