# Logix Browse Issue

**URL:** <https://forum.inductiveautomation.com/t/logix-browse-issue/15692>\
**Category:** Ignition\
**Created:** [October 17, 2017, 5:34pm UTC](https://forum.inductiveautomation.com/t/logix-browse-issue/15692 "2017-10-17T17:34:07Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Nelly](https://avatars.discourse-cdn.com/v4/letter/n/ed8c4c/32.png) [@Nelly](https://forum.inductiveautomation.com/u/Nelly)\
**Post date:** [October 17, 2017, 5:34pm UTC](https://forum.inductiveautomation.com/t/logix-browse-issue/15692/1 "2017-10-17T17:34:07Z")

</div>

Hi, I have similar issue, have just moved from the developing stage to site, and installed and licensed ignition on the new plant computer, restored my gateway, changed the AB logix device to the new site IP address schedule, and now cannot see any tags. In development was fine with the old IP addresses. Plant PC pings the PLC fine,

Thanks  
Neil

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [October 17, 2017, 5:41pm UTC](https://forum.inductiveautomation.com/t/logix-browse-issue/15692/2 "2017-10-17T17:41:39Z")

</div>

What version of Ignition are you using? Which driver are you using? What firmware version is the PLC?

---

<div class="post-metadata">

**Author:** ![Nelly](https://avatars.discourse-cdn.com/v4/letter/n/ed8c4c/32.png) [@Nelly](https://forum.inductiveautomation.com/u/Nelly)\
**Post date:** [October 17, 2017, 5:47pm UTC](https://forum.inductiveautomation.com/t/logix-browse-issue/15692/3 "2017-10-17T17:47:24Z")

</div>

Sir, my sincere apologies, the device was looking at the wrong slot for the processor, working fine now  
Thanks for replying  
Neil