# Logix Driver Bad Quality Tags

**URL:** <https://forum.inductiveautomation.com/t/logix-driver-bad-quality-tags/18944>\
**Category:** Ignition\
**Created:** [July 24, 2018, 5:17am UTC](https://forum.inductiveautomation.com/t/logix-driver-bad-quality-tags/18944 "2018-07-24T05:17:54Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![dtamada](https://avatars.discourse-cdn.com/v4/letter/d/f14d63/32.png) [@dtamada](https://forum.inductiveautomation.com/u/dtamada)\
**Post date:** [July 24, 2018, 5:17am UTC](https://forum.inductiveautomation.com/t/logix-driver-bad-quality-tags/18944/1 "2018-07-24T05:17:54Z")

</div>

Hi,  
I am using OPC-UA server with rockwell control logix version 24.

i am using trial linux virtual machine from inductive automation for development.

HoteIP: 192.168.2.1  
Timeout 5000  
Max Con. 10  
Slot: 0  
Automatic rebrowse : yes  
CIP con. 500

Frequently all the tags are showing bad quality …

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [July 24, 2018, 11:36am UTC](https://forum.inductiveautomation.com/t/logix-driver-bad-quality-tags/18944/2 "2018-07-24T11:36:50Z")

</div>

What does the diagnostics page for that device look like? Is the load factor over 100%?

If so… try some of the steps outlined here: [Device Load Factor](http://forum.inductiveautomation.com/t/device-load-factor/15781/5?u=kevin.herron)

---

<div class="post-metadata">

**Author:** ![Paullys50](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/paullys50/32/3324_2.png) [@Paullys50](https://forum.inductiveautomation.com/u/Paullys50)\
**Post date:** [July 24, 2018, 12:15pm UTC](https://forum.inductiveautomation.com/t/logix-driver-bad-quality-tags/18944/3 "2018-07-24T12:15:14Z")

</div>

Since you’re using it for development, I’m assuming you’re making constant changes to the PLC? If so, turn off “Automatic rebrowse” and manually restart the OPC-UA module when you create tags that Ignition actually needs to read.