# LogixDriver Failover

**URL:** <https://forum.inductiveautomation.com/t/logixdriver-failover/31447>\
**Category:** Ignition\
**Created:** [January 20, 2020, 10:15pm UTC](https://forum.inductiveautomation.com/t/logixdriver-failover/31447 "2020-01-20T22:15:52Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jonathan](https://avatars.discourse-cdn.com/v4/letter/j/aeb1de/32.png) [@Jonathan](https://forum.inductiveautomation.com/u/Jonathan)\
**Post date:** [January 20, 2020, 10:15pm UTC](https://forum.inductiveautomation.com/t/logixdriver-failover/31447/1 "2020-01-20T22:15:52Z")

</div>

I notice that when I force a failover my devices that use the LogixDriver driver seem to stay connected. Is there a setting some where that I need to adjust so that a fail over test will disconnect all my devices from the master gateway? This also seem to happen with a device using the TCP Driver.